EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Understanding Melt Pool Behavior of 316L Stainless Steel in Laser Powder Bed Fusion Additive Manufacturing

Zilong Zhang, Tianyu Zhang iD, Can Sun iD, Sivaji Karna iD, Lang Yuan iD

Micromachines · 23.01.2024 · 15 (2) · 170

DOI: 10.3390/mi15020170 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 23.01.2024. Verfasst von Zilong Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of South Carolina, Columbia, SC 29201, USA. Die Arbeit wurde bisher 47-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIST DOC, NASA, National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the laser powder bed fusion additive manufacturing process, the quality of fabrications is intricately tied to the laser–matter interaction, specifically the formation of the melt pool. This study experimentally examined the intricacies of melt pool characteristics and surface topography across diverse laser powers and speeds via single-track laser scanning on a bare plate and powder bed for 316L stainless steel. The results reveal that the presence of a powder layer amplifies melt pool instability and worsens irregularities due to increased laser absorption and the introduction of uneven mass from the powder. To provide a comprehensive understanding of melt pool dynamics, a high-fidelity computational model encompassing fluid dynamics, heat transfer, vaporization, and solidification was developed. It was validated against the measured melt pool dimensions and morphology, effectively predicting conduction and keyholing modes with irregular surface features. Particularly, the model explained the forming mechanisms of a defective morphology, termed swell-undercut, at high power and speed conditions, detailing the roles of recoil pressure and liquid refilling. As an application, multiple-track simulations replicate the surface features on cubic samples under two distinct process conditions, showcasing the potential of the laser–matter interaction model for process optimization.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingfluid dynamicslaser powder bed fusionmelt pool instabilitysurface topography

Autor:innen und Institutionen

  • Department of Mechanical Engineering, University of South Carolina, Columbia, SC 29201, USA.

ORCID-Profile: Tianyu Zhang, Can Sun, Sivaji Karna, Lang Yuan

Förderung

  • NIST DOC
  • NASA
  • National Science Foundation
  • U.S. Department of Commerce, National Institute of Standards and Technology
  • National Aeronautics and Space Administration

Zitieren

APA

Zhang, Z., Zhang, T., Sun, C., Karna, S., & Yuan, L. (2024). Understanding Melt Pool Behavior of 316L Stainless Steel in Laser Powder Bed Fusion Additive Manufacturing. Micromachines, 15(2), 170. https://doi.org/10.3390/mi15020170

Vancouver

Zhang Z, Zhang T, Sun C, Karna S, Yuan L. Understanding Melt Pool Behavior of 316L Stainless Steel in Laser Powder Bed Fusion Additive Manufacturing. Micromachines. 2024;15(2):170. doi:10.3390/mi15020170

BibTeX
@article{Zhang2024,
  author = {Zhang, Zilong and Zhang, Tianyu and Sun, Can and Karna, Sivaji and Yuan, Lang},
  title = {Understanding Melt Pool Behavior of 316L Stainless Steel in Laser Powder Bed Fusion Additive Manufacturing},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {2},
  pages = {170},
  doi = {10.3390/mi15020170}
}
Kostenlos starten →