EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Study of the Corrosion Resistance of 316L Stainless Steel Manufactured by Powder Bed Laser Additive Manufacturing

Juan Ignacio Ahuir-Torres, Andrew Burgess, Martin Charles Sharp, Tahsin Tecelli Öpöz, Sean P. Malkeson, Peter L. Falkingham, Robert I. Darlington, Samuel Tammas-Williams

Applied Sciences · 23.08.2024 · 14 (17) · 7471

DOI: 10.3390/app14177471 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 23.08.2024. Verfasst von Juan Ignacio Ahuir-Torres und 7 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Commercially available 316L (1.4404) stainless steel is commonly used for industrial filtration due to its combination of good material properties, particularly its corrosion resistance, which is a critical factor for filters in corrosive (e.g., saltwater) environments. Recently, laser powder bed fusion (LPBF) has enabled new more complex and efficient filtration pieces to be manufactured from this material. However, it is critical to know how the corrosion resistance is affected by this manufacturing strategy. Here, the corrosion resistance of LPBF manufactured 316L stainless steel is compared with wrought 316L sheet. The corrosion of the samples in saltwater was assessed with asymmetric electrochemical noise, potentiodynamic polarisation curve, and electrochemical impedance spectroscopy. The samples before and after corrosion were examined with scanning electron microscopy and energy-dispersive spectroscopy. The LPBF samples had higher corrosion resistance than the sheet samples and were more noble. The corrosion resistance of the LPBF sample increased with time, while the wrought sample corrosion resistance reduced over time. The corrosion mechanism of both samples was stable with time, formed of a passive film process and a bared material process. This paper presents the first study about the temporal evolution of the LPBF 316L stainless steel corrosion mechanism.

Zitieren

APA

Ahuir-Torres, J. I., Burgess, A., Sharp, M. C., Öpöz, T. T., Malkeson, S. P., Falkingham, P. L., Darlington, R. I., & Tammas-Williams, S. (2024). A Study of the Corrosion Resistance of 316L Stainless Steel Manufactured by Powder Bed Laser Additive Manufacturing. Applied Sciences, 14(17), 7471. https://doi.org/10.3390/app14177471

Vancouver

Ahuir-Torres JI, Burgess A, Sharp MC, Öpöz TT, Malkeson SP, Falkingham PL, et al. A Study of the Corrosion Resistance of 316L Stainless Steel Manufactured by Powder Bed Laser Additive Manufacturing. Applied Sciences. 2024;14(17):7471. doi:10.3390/app14177471

BibTeX
@article{AhuirTorres2024,
  author = {Ahuir-Torres, Juan Ignacio and Burgess, Andrew and Sharp, Martin Charles and Öpöz, Tahsin Tecelli and Malkeson, Sean P. and Falkingham, Peter L. and Darlington, Robert I. and Tammas-Williams, Samuel},
  title = {A Study of the Corrosion Resistance of 316L Stainless Steel Manufactured by Powder Bed Laser Additive Manufacturing},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {17},
  pages = {7471},
  doi = {10.3390/app14177471}
}
Kostenlos starten →