EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pre-Compensation of Thermal Error for Laser-Assisted Diamond Turning

Kaiyuan You iD, Guangyu Liu, Guangpeng Yan, Fengzhou Fang iD, Wei Wang, Li Du, Jiexiong Ding

Micromachines · 27.09.2023 · 14 (10) · 1843

DOI: 10.3390/mi14101843 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 27.09.2023. Verfasst von Kaiyuan You und 6 weiteren Autor:innen. Beteiligte Einrichtung: Yangtze Delta Region Institute (Quzhou), University of Electronic Science and Technology of China, Quzhou 324003, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation, National Natural Science Foundation of China, Municipal Government of Quzhou.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The laser-assisted diamond turning (LADT) method can effectively improve the machinability of hard and brittle materials based on the laser heating effect, resulting in prolonged diamond tool life and better surface integrity. However, due to the incomplete absorption of laser beam energy within the workpiece cutting zone, simultaneous heating of the tool holder occurs, resulting in a structural thermal expansion that affects the workpiece form accuracy. In this article, the form accuracy of a LADT-machined workpiece was systematically studied. Accurate calculations of the tool shank and tool holder thermal fields and thermal expansion were performed using thermodynamic coupled finite element analysis. In addition, the LADT tool path was precisely pre-compensated by taking into account the structure expansion. The experimental results demonstrate that the form accuracy can be significantly improved with a pre-compensated tool path, which provides crucial technical support for achieving a high-precision finish on optical elements using the LADT method.

Schlagwörter

Stichwörter der Autor:innen

finite element analysisform accuracylaser-assisted diamond turningtool path

Autor:innen und Institutionen

  • Yangtze Delta Region Institute (Quzhou), University of Electronic Science and Technology of China, Quzhou 324003, China.
  • School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China.
  • State Key Laboratory of Precision Measuring Technology and Instruments, Laboratory of Micro/Nano Manufacturing Technology (MNMT), Tianjin University, Tianjin 300072, China.

ORCID-Profile: Kaiyuan You, Fengzhou Fang

Förderung

  • China Postdoctoral Science Foundation
  • National Natural Science Foundation of China
  • Municipal Government of Quzhou

Zitieren

APA

You, K., Liu, G., Yan, G., Fang, F., Wang, W., Du, L., & Ding, J. (2023). Pre-Compensation of Thermal Error for Laser-Assisted Diamond Turning. Micromachines, 14(10), 1843. https://doi.org/10.3390/mi14101843

Vancouver

You K, Liu G, Yan G, Fang F, Wang W, Du L, et al. Pre-Compensation of Thermal Error for Laser-Assisted Diamond Turning. Micromachines. 2023;14(10):1843. doi:10.3390/mi14101843

BibTeX
@article{You2023,
  author = {You, Kaiyuan and Liu, Guangyu and Yan, Guangpeng and Fang, Fengzhou and Wang, Wei and Du, Li and Ding, Jiexiong},
  title = {Pre-Compensation of Thermal Error for Laser-Assisted Diamond Turning},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {10},
  pages = {1843},
  doi = {10.3390/mi14101843}
}
Kostenlos starten →