EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Fabrication Process of X-ray Focusing Mirrors

Qiuyan Liao, Fei Ding, Zhigao Chen, Duo Li, Bo Wang iD

Micromachines · 26.08.2023 · 14 (9) · 1666

DOI: 10.3390/mi14091666 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 26.08.2023. Verfasst von Qiuyan Liao und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Harbin Institute of Technology, Harbin 150001, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Strategic Priority Research Program of the Chinese Academy of Sciences, National Key R&D Program of China, Open Project Program of State Key Laboratory of applied optics.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The eXTP (enhanced X-ray Timing and Polarization) satellite is a prominent X-ray astronomy satellite designed primarily for conducting deep space X-ray astronomical observations. The satellite’s scientific payload consists of X-ray focusing mirrors. In order to fulfill the requirements of weight reduction and enhanced effective area, the thickness of mirrors is reduced to the sub-millimeter range and a multi-layer nested structure is employed. Manufacturing mirrors poses a significant challenge to both their quality and efficiency. The present research investigates the optimal replication process for mandrel ultraprecision machining, polishing, coating, electroforming nickel, and demolding. It analyzes the factors contributing to the challenging separation and the inability to release the mirror shells. Additionally, an automatic demolding device is developed, and the X-ray performance of the replication mirrors is verified. The fabrication process flow of the mirrors was initially introduced. To ensure the easy release of the mirror shells from the mandrels, a layer of diamond-like carbon (DLC) was applied as a release layer between the Au and NiP alloy. The adhesion strength of Au-C was found to be significantly lower than that of Au-NiP, as demonstrated by both molecular dynamic simulation and tensile testing. The development of an automatic demolding device with force feedback has been successfully completed. The reduction in the half-power diameter (HPD) of the mirror from 48 inches to 25 inches is an improvement that surpasses the production target.

Schlagwörter

Stichwörter der Autor:innen

X-ray focusing mirrorsdemolding devicediamond-like carbon (DLC)fabrication processrelease layer

Autor:innen und Institutionen

  • College of Mechanical Engineering, Harbin Institute of Technology, Harbin 150001, China.

ORCID-Profile: Bo Wang

Förderung

  • The Strategic Priority Research Program of the Chinese Academy of Sciences
  • National Key R&D Program of China
  • Open Project Program of State Key Laboratory of applied optics
  • National Key R&D Program of China
  • Strategic Priority Research Program of the Chinese Academy of Sciences

Zitieren

APA

Liao, Q., Ding, F., Chen, Z., Li, D., & Wang, B. (2023). Study on the Fabrication Process of X-ray Focusing Mirrors. Micromachines, 14(9), 1666. https://doi.org/10.3390/mi14091666

Vancouver

Liao Q, Ding F, Chen Z, Li D, Wang B. Study on the Fabrication Process of X-ray Focusing Mirrors. Micromachines. 2023;14(9):1666. doi:10.3390/mi14091666

BibTeX
@article{Liao2023,
  author = {Liao, Qiuyan and Ding, Fei and Chen, Zhigao and Li, Duo and Wang, Bo},
  title = {Study on the Fabrication Process of X-ray Focusing Mirrors},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {9},
  pages = {1666},
  doi = {10.3390/mi14091666}
}
Kostenlos starten →