EUVIMEDEUVIMED entdecken
Crossref

Efficient and precise fabrication of Wolter type-I x-ray mirrors via nickel electroforming replication using quartz glass mandrels

Gota Yamaguchi iD, Yusuke Matsuzawa iD, Takehiro Kume iD, Yoichi Imamura iD, Hiroaki Miyashita iD, Akinari Ito, Koki Sakuta iD, Kazuki Ampuku iD, Ryuto Fujii iD, Kentaro Hiraguri iD, Hirokazu Hashizume iD, Ikuyuki Mitsuishi iD und 1 weitere

Review of Scientific Instruments · 01.12.2023 · 94 (12)

DOI: 10.1063/5.0160262 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 14.12.2023. Verfasst von Gota Yamaguchi und 12 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for Advanced Science and Technology, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8904, Japan. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 18 Literaturangaben. Gefördert von: Japan Society for the Promotion of Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents an approach for fabricating Wolter type-I mirrors for x-ray telescopes using a nickel electroforming replication process with quartz glass mandrels. The proposed method addresses the challenges encountered in conventional fabrication techniques, which involve using electroless nickel-coated aluminum mandrels that are susceptible to corrosion and thermal deformation. Quartz glass mandrels offer excellent chemical, thermal, and mechanical stability, enabling the efficient production of high-performance mirrors. Wolter type-I mirrors for telescopes possess a large aperture that collects x-ray photons from the universe. However, previous nickel electroforming replication processes using quartz glass mandrels have challenges in fabricating large mirrors, particularly due to bubble pit formation during nickel shell development. In this study, we introduced an efficient pitting inhibition technique via vacuum degassing. This technique facilitates the precise replication of pit-free Wolter type-I mirrors for telescopes using quartz glass mandrels. We demonstrated the fabrication process on a Wolter type-I mirror proposed for FOXSI-4 [(FOXSI) Focusing Optics X-ray Solar Imager], resulting in three mirrors obtained from the same mandrel without repolishing or repairing. The figure error of the mirror was within 1 µm over most areas in both longitudinal and circumferential directions. The ray-tracing simulation indicated that the performance of the mirror was ∼12 arcsec in half-power diameter, comparable to the performance achieved by previous high-resolution x-ray missions.

Autor:innen und Institutionen

  • Research Center for Advanced Science and Technology, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8904, Japan.
  • RIKEN SPring-8 Center, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5148, Japan.
  • Technology Center, Natsume Optical Corporation, 1200-29 Kawaji, Iida, Nagano 399-2431, Japan.
  • Department of Precision Engineering, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656, Japan.
  • Graduate School of Science, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, Aichi 464-8602, Japan.

ORCID-Profile: Gota Yamaguchi, Yusuke Matsuzawa, Takehiro Kume, Yoichi Imamura, Hiroaki Miyashita, Koki Sakuta, Kazuki Ampuku, Ryuto Fujii, Kentaro Hiraguri, Hirokazu Hashizume, Ikuyuki Mitsuishi, Hidekazu Mimura

Förderung

  • Japan Society for the Promotion of Science

Zitieren

APA

Yamaguchi, G., Matsuzawa, Y., Kume, T., Imamura, Y., Miyashita, H., Ito, A., Sakuta, K., Ampuku, K., Fujii, R., Hiraguri, K., Hashizume, H., Mitsuishi, I., & Mimura, H. (2023). Efficient and precise fabrication of Wolter type-I x-ray mirrors via nickel electroforming replication using quartz glass mandrels. Review of Scientific Instruments, 94(12). https://doi.org/10.1063/5.0160262

Vancouver

Yamaguchi G, Matsuzawa Y, Kume T, Imamura Y, Miyashita H, Ito A, et al. Efficient and precise fabrication of Wolter type-I x-ray mirrors via nickel electroforming replication using quartz glass mandrels. Review of Scientific Instruments. 2023;94(12). doi:10.1063/5.0160262

BibTeX
@article{Yamaguchi2023,
  author = {Yamaguchi, Gota and Matsuzawa, Yusuke and Kume, Takehiro and Imamura, Yoichi and Miyashita, Hiroaki and Ito, Akinari and Sakuta, Koki and Ampuku, Kazuki and Fujii, Ryuto and Hiraguri, Kentaro and Hashizume, Hirokazu and Mitsuishi, Ikuyuki and Mimura, Hidekazu},
  title = {Efficient and precise fabrication of Wolter type-I x-ray mirrors via nickel electroforming replication using quartz glass mandrels},
  journal = {Review of Scientific Instruments},
  year = {2023},
  volume = {94},
  number = {12},
  doi = {10.1063/5.0160262}
}
Kostenlos starten →