EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Review of Visual Measurement Methods for Metal Vaporization Processes in Laser Powder Bed Fusion

Jiaqi Liu, Bin Wei, Hongjie Chang, Jie Li, Guang Yang

Micromachines · 30.06.2023 · 14 (7) · 1351

DOI: 10.3390/mi14071351 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Micromachines, online erschienen am 30.06.2023. Verfasst von Jiaqi Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Hebei University of Science and Technology, Shijiazhuang 050000, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 174 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guang Yang, Institute of Grain and Oil Crops, Hebei Academy of Agricultural and Forestry Sciences, Hebei Provincial Science and Technology Department.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser powder bed fusion (LPBF) is of great importance for the visual measurement and analysis of the metallization process, which is the process of solid, liquid, and gas phase transformations of metal powders under high-energy laser irradiation due to the low boiling point/high saturated vapor pressure. Since the evaporation of metals involves the interaction of driving forces such as vapor back pressure, surface tension, and gravity, the movement of the melt pool is not stable. At the same time, it also produces vaporization products such as vapor plumes and sprays, which cause defects such as bubbles, porosity, lack of fusion, inclusions, etc., during the manufacturing process of the parts, affecting the performance and manufacturing quality of the parts. More and more researchers are using imaging technologies, such as high-speed X-ray, high-speed visible light cameras, and high-speed schlieren imaging, to perform noncontact visual measurements and analyses of the melt pool, vapor plume, and spatter during the metal evaporation process, and the results show that the metal evaporation process can be suppressed by optimizing the process parameters and changing the processing atmosphere, thereby reducing part defects and improving part performance and built part quality. This paper reviews the research on metal evaporation mechanisms and visual measurement methods of metal evaporation, then discusses the measures of metal evaporation, and finally summarizes and prospects the future research hotspots of LPBF technology, according to the existing scholars’ research on numerical simulation analysis and visual measurement methods of the metal evaporation process.

Schlagwörter

Stichwörter der Autor:innen

evaporation productslaser powder bed fusionmelt poolmetal evaporationvisual measurement

Autor:innen und Institutionen

  • College of Mechanical Engineering, Hebei University of Science and Technology, Shijiazhuang 050000, China.
  • Shijiazhuang Information Engineering Vocational College, Shijiazhuang 050000, China.

Förderung

  • Guang Yang
  • Institute of Grain and Oil Crops, Hebei Academy of Agricultural and Forestry Sciences
  • Hebei Provincial Science and Technology Department

Zitieren

APA

Liu, J., Wei, B., Chang, H., Li, J., & Yang, G. (2023). Review of Visual Measurement Methods for Metal Vaporization Processes in Laser Powder Bed Fusion. Micromachines, 14(7), 1351. https://doi.org/10.3390/mi14071351

Vancouver

Liu J, Wei B, Chang H, Li J, Yang G. Review of Visual Measurement Methods for Metal Vaporization Processes in Laser Powder Bed Fusion. Micromachines. 2023;14(7):1351. doi:10.3390/mi14071351

BibTeX
@article{Liu2023,
  author = {Liu, Jiaqi and Wei, Bin and Chang, Hongjie and Li, Jie and Yang, Guang},
  title = {Review of Visual Measurement Methods for Metal Vaporization Processes in Laser Powder Bed Fusion},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {7},
  pages = {1351},
  doi = {10.3390/mi14071351}
}
Kostenlos starten →