EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Metal Laser-Based Powder Bed Fusion Process Development Using Optical Tomography

Roy Björkstrand iD, Jan Akmal iD, Mika Salmi iD

Materials · 22.03.2024 · 17 (7) · 1461

DOI: 10.3390/ma17071461 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.03.2024. Verfasst von Roy Björkstrand und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, School of Engineering, Aalto University, 02150 Espoo, Finland. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a set of 316 L stainless steel test specimens was additively manufactured by laser-based Powder Bed Fusion. The process parameters were varied for each specimen in terms of laser scan speed and laser power. The objective was to use a narrow band of parameters well inside the process window, demonstrating detailed parameter engineering for specialized additive manufacturing cases. The process variation was monitored using Optical Tomography to capture light emissions from the layer surfaces. Process emission values were stored in a statistical form. Micrographs were prepared and analyzed for defects using optical microscopy and image manipulation. The results of two data sources were compared to find correlations between lack of fusion, porosity, and layer-based energy emissions. A data comparison of Optical Tomography data and micrograph analyses shows that Optical Tomography can partially be used independently to develop new process parameters. The data show that the number of critical defects increases when the average Optical Tomography grey value passes a certain threshold. This finding can contribute to accelerating manufacturing parameter development and help meet the industrial need for agile component-specific parameter development.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingparameter engineeringprocess monitoringstainless steel

Autor:innen und Institutionen

  • Department of Mechanical Engineering, School of Engineering, Aalto University, 02150 Espoo, Finland.
  • EOS Metal Materials, Electro Optical Systems Finland Oy, Lemminkäisenkatu 36, 20520 Turku, Finland.

ORCID-Profile: Roy Björkstrand, Jan Akmal, Mika Salmi

Zitieren

APA

Björkstrand, R., Akmal, J., & Salmi, M. (2024). Metal Laser-Based Powder Bed Fusion Process Development Using Optical Tomography. Materials, 17(7), 1461. https://doi.org/10.3390/ma17071461

Vancouver

Björkstrand R, Akmal J, Salmi M. Metal Laser-Based Powder Bed Fusion Process Development Using Optical Tomography. Materials. 2024;17(7):1461. doi:10.3390/ma17071461

BibTeX
@article{Bjrkstrand2024,
  author = {Björkstrand, Roy and Akmal, Jan and Salmi, Mika},
  title = {Metal Laser-Based Powder Bed Fusion Process Development Using Optical Tomography},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {7},
  pages = {1461},
  doi = {10.3390/ma17071461}
}
Kostenlos starten →