Three-Dimensional Integrated Fan-Out Wafer-Level Package Micro-Bump Electromigration Study
Micromachines · 15.06.2023 · 14 (6) · 1255
DOI: 10.3390/mi14061255 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 15.06.2023. Verfasst von Wenchao Tian und 4 weiteren Autor:innen. Beteiligte Einrichtung: Hangzhou Institute of Technology, Xidian University, Hangzhou 311231, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Postdoctoral Science Foundation.
Abstract (Originalsprache)
To meet the demands for miniaturization and multi-functional and high-performance electronics applications, the semiconductor industry has shifted its packaging approach to multi-chip vertical stacking. Among the advanced packaging technologies for high-density interconnects, the most persistent factor affecting their reliability is the electromigration (EM) problem on the micro-bump. The operating temperature and the operating current density are the main factors affecting the EM phenomenon. Therefore, when a micro-bump structure is in the electrothermal environment, the EM failure mechanism of the high-density integrated packaging structure must be studied. To investigate the relationship between loading conditions and EM failure time in micro-bump structures, this study established an equivalent model of the vertical stacking structure of fan-out wafer-level packages. Then, the electrothermal interaction theory was used to carry out numerical simulations in an electrothermal environment. Finally, the MTTF equation was invoked, with Sn63Pb37 as the bump material, and the relationship between the operating environment and EM lifetime was investigated. The results showed that the current aggregation was the location where the bump structure was most susceptible to EM failure. The accelerating effect of the temperature on the EM failure time was more obvious at a current density of 3.5 A/cm2, which was 27.51% shorter than 4.5 A/cm2 at the same temperature difference. When the current density exceeded 4.5 A/cm2, the change in the failure time was not obvious, and the maximum critical value of the micro-bump failure was 4 A/cm2~4.5 A/cm2.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hangzhou Institute of Technology, Xidian University, Hangzhou 311231, China.
- School of Electro-Mechnical Engineering, Xidian University, Xi'an 710071, China.
- Zhongkexin Integrated Circuit Co., Wuxi 214035, China.
- Yangzhou Yangjie Electronic Technology Co., Ltd., Yangzhou 225008, China.
Förderung
- China Postdoctoral Science Foundation
Zitieren
APA
Tian, W., Gao, R., Gu, L., Ji, H., & Zhou, L. (2023). Three-Dimensional Integrated Fan-Out Wafer-Level Package Micro-Bump Electromigration Study. Micromachines, 14(6), 1255. https://doi.org/10.3390/mi14061255
Vancouver
Tian W, Gao R, Gu L, Ji H, Zhou L. Three-Dimensional Integrated Fan-Out Wafer-Level Package Micro-Bump Electromigration Study. Micromachines. 2023;14(6):1255. doi:10.3390/mi14061255
BibTeX
@article{Tian2023,
author = {Tian, Wenchao and Gao, Ran and Gu, Lin and Ji, Haoyue and Zhou, Liming},
title = {Three-Dimensional Integrated Fan-Out Wafer-Level Package Micro-Bump Electromigration Study},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {6},
pages = {1255},
doi = {10.3390/mi14061255}
}
EUVIMED