Exploring the Influence of Material Properties of Epoxy Molding Compound on Wafer Warpage in Fan-Out Wafer-Level Packaging
Materials · 30.04.2023 · 16 (9) · 3482
DOI: 10.3390/ma16093482 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 30.04.2023. Verfasst von Wan-Chun Chuang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Electromechanical Engineering, Engineering Technology Research & Promotion Center, National Sun Yat-sen University, Kaoh…. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council of Taiwan and Advanced Semiconductor Engineering Inc., National Science and Technology Council of Taiwan, Advanced Semiconductor Engineering Inc..
Abstract (Originalsprache)
This study investigated the impact of material properties of epoxy molding compounds on wafer warpage in fan-out wafer-level packaging. As there is currently a lack of comprehensive discussion on the various material property parameters of EMC materials, it is essential to identify the critical influencing factors and quantify the effects of each parameter on wafer warpage. The material properties include Young’s modulus of the epoxy molding compound before and after the glass transition temperature (Tg) range of 25–35 °C (EL) and 235–260 °C (EH), coefficient of thermal expansion (α1, α2), and the temperature change (∆T) between EL and EH. Results show that, within the range of extreme values of material properties, EL and α1 are the critical factors that affect wafer warpage during the decarrier process in fan-out packaging. α1 has a more significant impact on wafer warpage compared with EL. EH, α2, Tg, and ∆T have little influence on wafer warpage. Additionally, the study identified the optimized material property of the epoxy molding compound that can reduce the maximum wafer warpage in the X and Y directions from initial values of 7.34 mm and 7.189 mm to 0.545 mm and 0.45 mm, respectively, resulting in a reduction of wafer warpage of 92.58% (X direction) and 93.74% (Y direction). Thus, this study proposes an approach for evaluating the impact of material properties of epoxy molding compounds on wafer warpage in fan-out wafer-level packaging. The approach aims to address the issue of excessive wafer warpage due to material variation and to provide criteria for selecting appropriate epoxy molding compounds to enhance process yield in packaging production lines.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical and Electromechanical Engineering, Engineering Technology Research & Promotion Center, National Sun Yat-sen University, Kaohsiung 804, Taiwan.
ORCID-Profile: Wan-Chun Chuang
Förderung
- National Science and Technology Council of Taiwan and Advanced Semiconductor Engineering Inc.
- National Science and Technology Council of Taiwan
- Advanced Semiconductor Engineering Inc.
Zitieren
APA
Chuang, W. C., Huang, Y., & Chen, P. E. (2023). Exploring the Influence of Material Properties of Epoxy Molding Compound on Wafer Warpage in Fan-Out Wafer-Level Packaging. Materials, 16(9), 3482. https://doi.org/10.3390/ma16093482
Vancouver
Chuang WC, Huang Y, Chen PE. Exploring the Influence of Material Properties of Epoxy Molding Compound on Wafer Warpage in Fan-Out Wafer-Level Packaging. Materials. 2023;16(9):3482. doi:10.3390/ma16093482
BibTeX
@article{Chuang2023,
author = {Chuang, Wan-Chun and Huang, Yi and Chen, Po-En},
title = {Exploring the Influence of Material Properties of Epoxy Molding Compound on Wafer Warpage in Fan-Out Wafer-Level Packaging},
journal = {Materials},
year = {2023},
volume = {16},
number = {9},
pages = {3482},
doi = {10.3390/ma16093482}
}
EUVIMED