A Wire Bow Model of Diamond Wire Sawing with Asymmetric Arc Hypothesis
Micromachines · 06.05.2023 · 14 (5) · 1004
DOI: 10.3390/mi14051004 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 06.05.2023. Verfasst von Zhikui Dong und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Yanshan University, No. 438 West Hebei Avenue, Qinhuangdao 066004, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Diamond wire sawing is the main processing method for hard and brittle materials, but the unreasonable matching of process parameters will reduce its cutting ability and stability. In this paper, the asymmetric arc hypothesis of a wire bow model is proposed. Based on this hypothesis, an analytical model of the wire bow between the process parameters and the wire bow parameters was established and verified with a single-wire cutting experiment. The model considers the asymmetry of the wire bow in diamond wire sawing. The tension at both ends of the wire bow is called the endpoint tension; by calculating the difference in tension between the two ends, a reference for the cutting stability and a tension range for the selection of the diamond wire were provided. The model was used to calculate the wire bow deflection and the cutting force, providing theoretical guidance for the matching of process parameters. Based on the theoretical analysis of the cutting force, endpoint tension and wire bow deflection, the cutting ability, cutting stability, and the risk of wire cutting were predicted.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Yanshan University, No. 438 West Hebei Avenue, Qinhuangdao 066004, China.
- Plant 4, Fuyang Industrial Building, Fuyuan Road, Xiangcheng District, Suzhou 215100, China.
- XCMG Earthmoving Machinery Division, NO. 99 Kunpeng Bei Road, Xuzhou Economic Development Zone, Xuzhou 221004, China.
ORCID-Profile: Zhikui Dong, Chenpu Zhang
Zitieren
APA
Dong, Z., Zhang, C., Liu, Z., Zhao, Y., Xing, K., & Guo, W. (2023). A Wire Bow Model of Diamond Wire Sawing with Asymmetric Arc Hypothesis. Micromachines, 14(5), 1004. https://doi.org/10.3390/mi14051004
Vancouver
Dong Z, Zhang C, Liu Z, Zhao Y, Xing K, Guo W. A Wire Bow Model of Diamond Wire Sawing with Asymmetric Arc Hypothesis. Micromachines. 2023;14(5):1004. doi:10.3390/mi14051004
BibTeX
@article{Dong2023,
author = {Dong, Zhikui and Zhang, Chenpu and Liu, Ziliang and Zhao, Yanheng and Xing, Ke and Guo, Wenming},
title = {A Wire Bow Model of Diamond Wire Sawing with Asymmetric Arc Hypothesis},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {5},
pages = {1004},
doi = {10.3390/mi14051004}
}
EUVIMED