EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Validation of an ANN-Based Approach for Temperature-Dependent Equivalent Circuit Modeling of SAW Resonators

Miloš Radojković, Giovanni Gugliandolo iD, Mariangela Latino, Zlatica Marinković iD, Giovanni Crupi iD, Nicola Donato iD

Micromachines · 28.04.2023 · 14 (5) · 967

DOI: 10.3390/mi14050967 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 28.04.2023. Verfasst von Miloš Radojković und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Electronic Engineering, University of Niš, 18000 Niš, Serbia. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of the Technological Development, Science and Innovations, Republic of Serbia, Ministry of Science, Technological Development and Innovations of the Republic of Serbia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, a novel approach is proposed for modeling the temperature-dependent behavior of a surface acoustic wave (SAW) resonator, by using a combination of a lumped-element equivalent circuit model and artificial neural networks (ANNs). More specifically, the temperature dependence of the equivalent circuit parameters/elements (ECPs) is modeled using ANNs, making the equivalent circuit model temperature-dependent. The developed model is validated by using scattering parameter measurements performed on a SAW device with a nominal resonant frequency of 423.22 MHz and under different temperature conditions (i.e., from 0 °C to 100 °C). The extracted ANN-based model can be used for simulation of the SAW resonator RF characteristics in the considered temperature range without the need for further measurements or equivalent circuit extraction procedures. The accuracy of the developed ANN-based model is comparable to that of the original equivalent circuit model.

Schlagwörter

Stichwörter der Autor:innen

admittance parametersartificial neural networksequivalent circuit modelresonancescattering parameter measurementssurface acoustic wave resonatorstemperature

Autor:innen und Institutionen

  • Faculty of Electronic Engineering, University of Niš, 18000 Niš, Serbia.
  • Department of Engineering, University of Messina, 98166 Messina, Italy.
  • BIOMORF Department, University of Messina, 98125 Messina, Italy.

ORCID-Profile: Giovanni Gugliandolo, Zlatica Marinković, Giovanni Crupi, Nicola Donato

Förderung

  • Ministry of the Technological Development, Science and Innovations, Republic of Serbia
  • Ministry of Science, Technological Development and Innovations of the Republic of Serbia

Zitieren

APA

Radojković, M., Gugliandolo, G., Latino, M., Marinković, Z., Crupi, G., & Donato, N. (2023). Development and Validation of an ANN-Based Approach for Temperature-Dependent Equivalent Circuit Modeling of SAW Resonators. Micromachines, 14(5), 967. https://doi.org/10.3390/mi14050967

Vancouver

Radojković M, Gugliandolo G, Latino M, Marinković Z, Crupi G, Donato N. Development and Validation of an ANN-Based Approach for Temperature-Dependent Equivalent Circuit Modeling of SAW Resonators. Micromachines. 2023;14(5):967. doi:10.3390/mi14050967

BibTeX
@article{Radojkovi2023,
  author = {Radojković, Miloš and Gugliandolo, Giovanni and Latino, Mariangela and Marinković, Zlatica and Crupi, Giovanni and Donato, Nicola},
  title = {Development and Validation of an ANN-Based Approach for Temperature-Dependent Equivalent Circuit Modeling of SAW Resonators},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {5},
  pages = {967},
  doi = {10.3390/mi14050967}
}
Kostenlos starten →