Development of Temperature Sensor Based on AlN/ScAlN SAW Resonators
Electronics · 12.09.2023 · 12 (18) · 3863
DOI: 10.3390/electronics12183863 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electronics, online erschienen am 12.09.2023. Verfasst von Min Wei und 8 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key R&D program of Hubei Province, National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Temperature monitoring in extreme environments presents new challenges for MEMS sensors. Since aluminum nitride (AlN)/scandium aluminum nitride (ScAlN)-based surface acoustic wave (SAW) devices have a high Q-value, good temperature drift characteristics, and the ability to be compatible with CMOS, they have become some of the preferred devices for wireless passive temperature measurement. This paper presents the development of AlN/ScAlN SAW-based temperature sensors. Three methods were used to characterize the temperature characteristics of a thin-film SAW resonator, including direct measurement by GSG probe station, and indirect measurement by oscillation circuit and antenna. The temperature characteristics of the three methods in the range of 30–100 °C were studied. The experimental results show that the sensitivities obtained with the three schemes were −28.9 ppm/K, −33.6 ppm/K, and −29.3 ppm/K. The temperature sensor using the direct measurement method had the best linearity, with a value of 0.0019%, and highest accuracy at ±0.70 °C. Although there were differences in performance, the characteristics of the three SAW temperature sensors make them suitable for sensing in various complex environments.
Förderung
- Key R&D program of Hubei Province
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- China Postdoctoral Science Foundation
Zitieren
APA
Wei, M., Liu, Y., Qu, Y., Gu, X., Wang, Y., Liu, W., Cai, Y., Guo, S., & Sun, C. (2023). Development of Temperature Sensor Based on AlN/ScAlN SAW Resonators. Electronics, 12(18), 3863. https://doi.org/10.3390/electronics12183863
Vancouver
Wei M, Liu Y, Qu Y, Gu X, Wang Y, Liu W, et al. Development of Temperature Sensor Based on AlN/ScAlN SAW Resonators. Electronics. 2023;12(18):3863. doi:10.3390/electronics12183863
BibTeX
@article{Wei2023,
author = {Wei, Min and Liu, Yan and Qu, Yuanhang and Gu, Xiyu and Wang, Yilin and Liu, Wenjuan and Cai, Yao and Guo, Shishang and Sun, Chengliang},
title = {Development of Temperature Sensor Based on AlN/ScAlN SAW Resonators},
journal = {Electronics},
year = {2023},
volume = {12},
number = {18},
pages = {3863},
doi = {10.3390/electronics12183863}
}
EUVIMED