EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Aging Treatment Regimes on Microstructure and Mechanical Properties of Selective Laser Melted 17-4 PH Steel

Dongdong Dong, Jiang Wang, Chaoyue Chen, Xuchang Tang, Yun Ye, Zhongming Ren, Shuo Yin iD, Zhenyu Yuan, Min Liu, Kesong Zhou iD

Micromachines · 18.04.2023 · 14 (4) · 871

DOI: 10.3390/mi14040871 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 18.04.2023. Verfasst von Dongdong Dong und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: GDAS' Project of Science and Technology Development, Guangdong Special Support Program, Guangzhou Project of Science & Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aging is indispensable for balancing the strength and ductility of selective laser melted (SLM) precipitation hardening steels. This work investigated the influence of aging temperature and time on the microstructure and mechanical properties of SLM 17-4 PH steel. The 17-4 PH steel was fabricated by SLM under a protective argon atmosphere (99.99 vol.%), then the microstructure and phase composition after different aging treatments were characterized via different advanced material characterization techniques, and the mechanical properties were systematically compared. Coarse martensite laths were observed in the aged samples compared with the as-built ones, regardless of the aging time and temperature. Increasing the aging temperature resulted in a larger grain size of the martensite lath and precipitation. The aging treatment induced the formation of the austenite phase with a face-centered cubic (FCC) structure. With prolonged aging treatment, the volume fraction of the austenite phase increased, which agreed with the EBSD phase mappings. The ultimate tensile strength (UTS) and yield strength gradually increased with increasing aging times at 482 °C. The UTS reached its peak value after aging for 3 h at 482 °C, which was similar to the trend of microhardness (i.e., UTS = 1353.4 MPa). However, the ductility of the SLM 17-4 PH steel decreased rapidly after aging treatment. This work reveals the influence of heat treatment on SLM 17-4 steel and proposes an optimal heat-treatment regime for the SLM high-performance steels.

Schlagwörter

Stichwörter der Autor:innen

17-4 PH steelaging treatment regimesmechanical propertiesmicrostructural evolutionselective laser melting

Autor:innen und Institutionen

  • School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China.
  • National Engineering Laboratory of Modern Materials Surface Engineering Technology, Guangdong Provincial Key Laboratory of Modern Surface Engineering Technology, Institute of New Materials, Guangdong Academy of Sciences…
  • State Key Laboratory of Advanced Special Steels, School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China.
  • Department of Mechanical and Manufacturing Engineering, Trinity College Dublin, University of Dublin, Parsons Building, D02 PN40 Dublin, Ireland.
  • Wuhu Tianhang Equipment Technology Co., Ltd., Wuhu 241000, China.

ORCID-Profile: Shuo Yin, Kesong Zhou

Förderung

  • GDAS' Project of Science and Technology Development
  • Guangdong Special Support Program
  • Guangzhou Project of Science & Technology
  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • Shanghai Rising-Star Program
  • Independent Research Project of State Key Laboratory of Advanced Special Steel, Shanghai Key Laboratory of Advanced Ferrometallurgy, Shanghai University
  • Science and Technology Commission of Shanghai Municipality

Zitieren

APA

Dong, D., Wang, J., Chen, C., Tang, X., Ye, Y., Ren, Z., Yin, S., Yuan, Z., Liu, M., & Zhou, K. (2023). Influence of Aging Treatment Regimes on Microstructure and Mechanical Properties of Selective Laser Melted 17-4 PH Steel. Micromachines, 14(4), 871. https://doi.org/10.3390/mi14040871

Vancouver

Dong D, Wang J, Chen C, Tang X, Ye Y, Ren Z, et al. Influence of Aging Treatment Regimes on Microstructure and Mechanical Properties of Selective Laser Melted 17-4 PH Steel. Micromachines. 2023;14(4):871. doi:10.3390/mi14040871

BibTeX
@article{Dong2023,
  author = {Dong, Dongdong and Wang, Jiang and Chen, Chaoyue and Tang, Xuchang and Ye, Yun and Ren, Zhongming and Yin, Shuo and Yuan, Zhenyu and Liu, Min and Zhou, Kesong},
  title = {Influence of Aging Treatment Regimes on Microstructure and Mechanical Properties of Selective Laser Melted 17-4 PH Steel},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {4},
  pages = {871},
  doi = {10.3390/mi14040871}
}
Kostenlos starten →