EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser Powder Bed Fusion of 316L Stainless Steel: Effect of Laser Polishing on the Surface Morphology and Corrosion Behavior

Jun Liu, Haojun Ma, Lingjian Meng, Huan Yang iD, Can Yang, Shuangchen Ruan, Deqin Ouyang, Shuwen Mei, Leimin Deng, Jie Chen, Yu Cao iD

Micromachines · 14.04.2023 · 14 (4) · 850

DOI: 10.3390/mi14040850 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 14.04.2023. Verfasst von Jun Liu und 10 weiteren Autor:innen. Beteiligte Einrichtung: Zhejiang Provincial Key Laboratory of Laser Processing Robotics, College of Mechanical & Electrical Engineering, Wenzhou University, Wenzhou 325035, …. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Natural Science Foundation of Top Talent of SZTU, Zhejiang Provincial Natural Science Funds of China, Natural Science Foundation of Top Talent of Shenzhen Technology University, SZTU.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recently, laser polishing, as an effective post-treatment technology for metal parts fabricated by laser powder bed fusion (LPBF), has received much attention. In this paper, LPBF-ed 316L stainless steel samples were polished by three different types of lasers. The effect of laser pulse width on surface morphology and corrosion resistance was investigated. The experimental results show that, compared to the nanosecond (NS) and femtosecond (FS) lasers, the surface material’s sufficient remelting realized by the continuous wave (CW) laser results in a significant improvement in roughness. The surface hardness is increased and the corrosion resistance is the best. The microcracks on the NS laser-polished surface lead to a decrease in the microhardness and corrosion resistance. The FS laser does not significantly improve surface roughness. The ultrafast laser-induced micro-nanostructures increase the contact area of the electrochemical reaction, resulting in a decrease in corrosion resistance.

Schlagwörter

Stichwörter der Autor:innen

316L stainless steelelectrochemical corrosionlaser polishingselective laser meltingsurface morphology

Autor:innen und Institutionen

  • Zhejiang Provincial Key Laboratory of Laser Processing Robotics, College of Mechanical & Electrical Engineering, Wenzhou University, Wenzhou 325035, China.
  • Sino-German College of Intelligent Manufacturing, Shenzhen Technology University, Shenzhen 518118, China.
  • Nantong Jinyuan Intelligent Technology Co., Nantong 226007, China.
  • Wuhan National Research Center for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074, China.
  • Wenzhou University Rui'an Graduate College, Wenzhou University, Ruian 325207, China.

ORCID-Profile: Huan Yang, Yu Cao

Förderung

  • the Natural Science Foundation of Top Talent of SZTU
  • Zhejiang Provincial Natural Science Funds of China
  • Natural Science Foundation of Top Talent of Shenzhen Technology University, SZTU
  • Shenzhen key Project for Technology Development
  • The Open Project Program of Wuhan National Laboratory for Optoelectronics
  • Natural Science Foundation of Top Talent of SZTU

Zitieren

APA

Liu, J., Ma, H., Meng, L., Yang, H., Yang, C., Ruan, S., Ouyang, D., Mei, S., Deng, L., Chen, J., & Cao, Y. (2023). Laser Powder Bed Fusion of 316L Stainless Steel: Effect of Laser Polishing on the Surface Morphology and Corrosion Behavior. Micromachines, 14(4), 850. https://doi.org/10.3390/mi14040850

Vancouver

Liu J, Ma H, Meng L, Yang H, Yang C, Ruan S, et al. Laser Powder Bed Fusion of 316L Stainless Steel: Effect of Laser Polishing on the Surface Morphology and Corrosion Behavior. Micromachines. 2023;14(4):850. doi:10.3390/mi14040850

BibTeX
@article{Liu2023,
  author = {Liu, Jun and Ma, Haojun and Meng, Lingjian and Yang, Huan and Yang, Can and Ruan, Shuangchen and Ouyang, Deqin and Mei, Shuwen and Deng, Leimin and Chen, Jie and Cao, Yu},
  title = {Laser Powder Bed Fusion of 316L Stainless Steel: Effect of Laser Polishing on the Surface Morphology and Corrosion Behavior},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {4},
  pages = {850},
  doi = {10.3390/mi14040850}
}
Kostenlos starten →