Research on Chemical Mechanical Polishing Technology for Zirconium-Based Amorphous Alloys
Micromachines · 28.02.2023 · 14 (3) · 584
DOI: 10.3390/mi14030584 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 28.02.2023. Verfasst von Wei Hang und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Zhejiang Province, National Natural Science Foundation of China, Fundamental Research Funds for the Provincial Universities of Zhejiang.
Abstract (Originalsprache)
Crystallization often occurs in the processing of amorphous alloys, causing the materials lose their excellent properties. The study adopts chemical mechanical polishing of amorphous alloys, presenting the effect of the rotational speed of the polishing turntable, size of abrasive, polishing pressure, and oxidant concentration. The Taguchi method is used to find the best processing parameters, and AFM is used to characterize the machined material surface. At the same time, XPS is used to detect the change of oxide film composition with the addition of oxidant. The results indicate the optimum process parameters: rotational speed of the polishing turntable is 75 r/min, polishing pressure is 28.3 kPa, the size of abrasive is 0.5 μm, and the size of abrasive is a significant factor affecting surface roughness Sa. In addition, as the size of abrasive increases, the material removal rate increases while the surface roughness Sa increases. At pH 10, with an abrasive particle size of 0.5 μm, as the H2O2 concentration increases, the MRR first rapidly decreases at 0.21 wt.% H2O2, and then gradually increases, while the Sa decreases. Furthermore, with the addition of oxidant, the main composition of the surface oxide film changes from oxide to hydroxide, and the contents of Zr4+ and Cu0/Cu1+ elements increase. The findings can provide a feasible chemical mechanical polishing process for zirconium-based amorphous alloys to obtain a satisfactory polishing effect.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310023, China.
- Center for High Pressure Science and Technology Advanced Research, Shanghai 201203, China.
- School of Materials Science and Engineering, Southeast University, Nanjing 211189, China.
- Key Laboratory for Light-Weight Materials, Nanjing Tech University, Nanjing 210009, China.
ORCID-Profile: Wei Hang, Qiaoshi Zeng
Förderung
- Natural Science Foundation of Zhejiang Province
- National Natural Science Foundation of China
- Fundamental Research Funds for the Provincial Universities of Zhejiang
Zitieren
APA
Hang, W., Song, C., Yin, Z., Liu, Y., Wang, Q., Wang, Y., Ma, Y., & Zeng, Q. (2023). Research on Chemical Mechanical Polishing Technology for Zirconium-Based Amorphous Alloys. Micromachines, 14(3), 584. https://doi.org/10.3390/mi14030584
Vancouver
Hang W, Song C, Yin Z, Liu Y, Wang Q, Wang Y, et al. Research on Chemical Mechanical Polishing Technology for Zirconium-Based Amorphous Alloys. Micromachines. 2023;14(3):584. doi:10.3390/mi14030584
BibTeX
@article{Hang2023,
author = {Hang, Wei and Song, Chao and Yin, Ziliang and Liu, Ye and Wang, Qifan and Wang, Yinggang and Ma, Yi and Zeng, Qiaoshi},
title = {Research on Chemical Mechanical Polishing Technology for Zirconium-Based Amorphous Alloys},
journal = {Micromachines},
year = {2023},
volume = {14},
number = {3},
pages = {584},
doi = {10.3390/mi14030584}
}
EUVIMED