EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical and Plasma Electrolytic Polishing of Dental Alloys

Katharina Witzke iD, Renko Kensbock, Caroline Ulrike Willsch, Katja Fricke, Sander Bekeschus iD, Hans-Robert Metelmann iD

Materials · 15.09.2023 · 16 (18) · 6222

DOI: 10.3390/ma16186222 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 15.09.2023. Verfasst von Katharina Witzke und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Oral, Maxillofacial, and Plastic Surgery, Greifswald University Medical Center, Sauerbruchstr., 17475 Greifswald, Germany. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Social Fund (ESF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

(1)

Background

In dentistry, a reduction in surface roughness is established mostly by conventional mechanical polishing to hinder biofilm adhesion. This is time- and labor-intensive. Plasma electrolytic polishing is believed to be an effective finishing method due to the reduced treatment time and materials used for applications in dentistry. (2)

Methods

Co-Cr-Mo dental alloy samples were sandblasted and prepared with either plasma electrolytic or conventional mechanical polishing. Evaluation of the polishing methods was obtained by atomic force microscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. (3)

Results

The sandblasted samples showed the highest surface roughness (Heraenium® Sun 991 ± 288 nm; Wironit® 1187 ± 331 nm). Our results show that with plasma electrolytic polishing, Co-Cr-Mo surfaces can be polished with a surface roughness in the nanometer range, comparable to those achieved by conventional mechanical polishing. Conventional mechanical polishing (Heraenium® Sun 134 ± 23 nm; Wironit® 114 ± 11 nm) provided lower surface roughness values compared to plasma electrolytic polishing (Heraenium® Sun 288 ± 94 nm; Wironit® 261 ± 49 nm). We anticipate our pilot study as a starting point for future studies to refine process parameters and quantitative microbiological assays. (4)

Conclusions

Plasma electrolytic polishing might have a promising future for polishing dental alloys.

Schlagwörter

Stichwörter der Autor:innen

AFMEDXSEMconventional mechanical polishingdental alloyplasma electrolytic polishingsurface roughness

Autor:innen und Institutionen

  • Department of Oral, Maxillofacial, and Plastic Surgery, Greifswald University Medical Center, Sauerbruchstr., 17475 Greifswald, Germany.
  • Leibniz Institute for Plasma Science and Technology (INP), Felix Hausdorff-Str. 2, 17489 Greifswald, Germany.
  • Clinic and Policlinic for Dermatology and Venerology, Rostock University Medical Center, Strempelstr. 13, 18057 Rostock, Germany.

ORCID-Profile: Katharina Witzke, Sander Bekeschus, Hans-Robert Metelmann

Förderung

  • European Social Fund (ESF)

Zitieren

APA

Witzke, K., Kensbock, R., Willsch, C. U., Fricke, K., Bekeschus, S., & Metelmann, H. R. (2023). Mechanical and Plasma Electrolytic Polishing of Dental Alloys. Materials, 16(18), 6222. https://doi.org/10.3390/ma16186222

Vancouver

Witzke K, Kensbock R, Willsch CU, Fricke K, Bekeschus S, Metelmann HR. Mechanical and Plasma Electrolytic Polishing of Dental Alloys. Materials. 2023;16(18):6222. doi:10.3390/ma16186222

BibTeX
@article{Witzke2023,
  author = {Witzke, Katharina and Kensbock, Renko and Willsch, Caroline Ulrike and Fricke, Katja and Bekeschus, Sander and Metelmann, Hans-Robert},
  title = {Mechanical and Plasma Electrolytic Polishing of Dental Alloys},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {18},
  pages = {6222},
  doi = {10.3390/ma16186222}
}
Kostenlos starten →