EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Flame-Assisted Laser Polishing of Alumina Ceramic Surface Properties

Ting Guo, Chao Wang, Junyong Zeng, Wenqi Wang, Zhenyu Zhao

Micromachines · 23.02.2023 · 14 (3) · 520

DOI: 10.3390/mi14030520 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 23.02.2023. Verfasst von Ting Guo und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Sino-German Robotics, Shenzhen Institute of Information Technology, Shenzhen 518029, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technology Innovation Platform Project of Shenzhen Institute of Information Technology, Guangdong Province Higher Vocational Colleges and Schools Pearl River Scholar Funded Scheme, Department of Science and Technology of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser polishing was used to reduce the surface roughness and improve the surface properties of alumina ceramics. In this paper, a response surface experimental design scheme is used to establish a mathematical model based on the Box–Behnken central combination principle, with the surface roughness as the optimization target to optimize the optimal process parameters for the laser polishing of alumina ceramics, to suppress the polished surface cracks by preheating the material, and to study the changes of surface properties of laser-polished alumina ceramics under different preheating temperatures. The optimal laser polishing process parameters were optimized by response surface experiments with a scanning speed of 323.5 mm/s, a laser power of 73.63 W, a pulse frequency of 2.3 kHz, and a scanning spacing of 0.09 mm; compared with the initial surface roughness of 4.67 μm, the polished surface roughness was 0.96 μm under the experimentally optimized polishing parameters, and the surface cracks were suppressed after the preheating treatment. The surface roughness was further reduced to 0.74 μm, and the surface wear coefficient was reduced from 0.5939 to 0.5725, while the surface hardness was increased from 1810 to 2063 HV. Optimization of the laser polishing process parameters through the response surface can significantly reduce the surface roughness of the material, while the flame preheating, assisted by the laser-polished surface wear resistance and hardness, is improved.

Schlagwörter

Stichwörter der Autor:innen

alumina ceramicslaser polishingpreheatingresponse surface methodroughness

Autor:innen und Institutionen

  • School of Sino-German Robotics, Shenzhen Institute of Information Technology, Shenzhen 518029, China.
  • School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, China.
  • College of Mechatronics and Control Engineering, Shenzhen University, Shenzhen 518060, China.

Förderung

  • Technology Innovation Platform Project of Shenzhen Institute of Information Technology
  • Guangdong Province Higher Vocational Colleges and Schools Pearl River Scholar Funded Scheme
  • Department of Science and Technology of Guangdong Province
  • Natural Science Foundation of Hunan Province
  • Education Department of Hunan Province
  • Guangdong Province Precision Manufacturing and Intelligent Production Education Integration Innovation Platform

Zitieren

APA

Guo, T., Wang, C., Zeng, J., Wang, W., & Zhao, Z. (2023). Flame-Assisted Laser Polishing of Alumina Ceramic Surface Properties. Micromachines, 14(3), 520. https://doi.org/10.3390/mi14030520

Vancouver

Guo T, Wang C, Zeng J, Wang W, Zhao Z. Flame-Assisted Laser Polishing of Alumina Ceramic Surface Properties. Micromachines. 2023;14(3):520. doi:10.3390/mi14030520

BibTeX
@article{Guo2023,
  author = {Guo, Ting and Wang, Chao and Zeng, Junyong and Wang, Wenqi and Zhao, Zhenyu},
  title = {Flame-Assisted Laser Polishing of Alumina Ceramic Surface Properties},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {3},
  pages = {520},
  doi = {10.3390/mi14030520}
}
Kostenlos starten →