EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Simulation and Validation of Laser Polishing of Alumina Ceramic Surface

Chao Wang, Zhenyu Zhao, Houming Zhou, Junyong Zeng, Zhanwang Zhou

Micromachines · 29.10.2023 · 14 (11) · 2012

DOI: 10.3390/mi14112012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 29.10.2023. Verfasst von Chao Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Sino-German Robotics, Shenzhen Institute of Information Technology, Shenzhen 518172, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Technology Innovation Platform Project of Shenzhen Institute of Information Technology, Guangdong Province Higher Vocational Colleges and Schools Pearl River Scholar Funded Scheme, the Project of Science and Technology Department of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser polishing is a noncontact and efficient processing method for surface treatment of different materials. It removes surface material and improves its quality by means of a laser beam that acts directly on the surface of the material. The material surface roughness is a major criterion that evaluates the polishing effect when alumina ceramics are polished by a laser. In this study, the effects of three factors, namely, laser power, scanning speed, and pulse frequency, on the surface roughness were investigated through orthogonal tests. The optimum polishing parameters were obtained through a comparison of the experimental results. Compared to the initial surface roughness (Ra = 1.624 μm), the roughness of the polished surface was reduced to Ra = 0.549 μm. A transient two-dimensional model was established by the COMSOL Multiphysics 5.5, and the flow condition of the material inside the molten pool of laser-polished alumina ceramics and the surface morphology of the smoothing process were investigated by utilizing the optimal polishing parameters obtained from the experiments. The simulation results showed that in the process of laser polishing, the fluid inside the molten pool flowed from the peaks to the valleys under the action of capillary force, and the inside of the molten pool tended to be smoothened gradually. In order to verify the correctness of the numerical model, the surface profile at the same position on the material surface was compared, and the results showed that the maximum error between the numerical simulation and the experimental results was 17.8%.

Schlagwörter

Stichwörter der Autor:innen

alumina ceramicslaser polishingnumerical simulationorthogonal test

Autor:innen und Institutionen

  • School of Sino-German Robotics, Shenzhen Institute of Information Technology, Shenzhen 518172, China.
  • School of General Aviation, Jingchu University of Technology, Jingmen 448001, China.
  • Mechanical Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China.
  • College of Mechatronics and Control Engineering, Shenzhen University, Shenzhen 518061, China.

Förderung

  • the Technology Innovation Platform Project of Shenzhen Institute of Information Technology
  • Guangdong Province Higher Vocational Colleges and Schools Pearl River Scholar Funded Scheme
  • the Project of Science and Technology Department of Guangdong Province
  • the Project of Education Department of Guangdong Province
  • the Education Department of Hunan Province

Zitieren

APA

Wang, C., Zhao, Z., Zhou, H., Zeng, J., & Zhou, Z. (2023). Numerical Simulation and Validation of Laser Polishing of Alumina Ceramic Surface. Micromachines, 14(11), 2012. https://doi.org/10.3390/mi14112012

Vancouver

Wang C, Zhao Z, Zhou H, Zeng J, Zhou Z. Numerical Simulation and Validation of Laser Polishing of Alumina Ceramic Surface. Micromachines. 2023;14(11):2012. doi:10.3390/mi14112012

BibTeX
@article{Wang2023,
  author = {Wang, Chao and Zhao, Zhenyu and Zhou, Houming and Zeng, Junyong and Zhou, Zhanwang},
  title = {Numerical Simulation and Validation of Laser Polishing of Alumina Ceramic Surface},
  journal = {Micromachines},
  year = {2023},
  volume = {14},
  number = {11},
  pages = {2012},
  doi = {10.3390/mi14112012}
}
Kostenlos starten →