Investigation of Laser-Assisted Micro-Milling Process of Inconel 718
Journal of Manufacturing and Materials Processing · 10.08.2023 · 7 (4) · 149
DOI: 10.3390/jmmp7040149 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 10.08.2023. Verfasst von Haijun Zhang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science Challenge Project of China.
Abstract (Originalsprache)
While Inconel 718 is a widely used engineering material in industrial fields such as the aerospace and automotive fields, the machined surface integrity has a significant effect on the performance of its components and parts. In this work, the laser-assisted micro-milling process of Inconel 718 is investigated using a combination of experiments and finite element simulations. Firstly, an experimental platform of laser-assisted milling is built, and a three-dimensional thermal–mechanical coupled finite element model of laser-assisted milling of Inconel 718 is then established. Secondly, laser-assisted milling experiments and finite element simulations are conducted to investigate the impact of laser assistance on cutting force, chip morphology, tool wear and surface topography of Inconel 718 under a milling process. The results indicate that laser-assisted milling results in a moderate reduction in cutting forces while enhancing surface integrity and chip continuity, as compared with ordinary milling. Thirdly, orthogonal experiments of laser-assisted milling of Inconel 718 are conducted to discover the optimal processing parameters, including spindle speed, feed per tooth, milling depth and laser parameters. Finally, single-factor experiments are conducted to investigate the effect of laser power on cutting force, chip morphology, tool wear, groove burr and surface roughness in the laser-assisted milling of Inconel 718. And, a minimal surface roughness Sa of 137 nm for Inconel 718 accompanied by minimal tool wear is experimentally obtained via laser-assisted milling. These findings highlight the effectiveness of applying laser assistance in enhancing the machinability of difficult-to-machine materials for achieving desirable machined surface integrity.
Förderung
- Science Challenge Project of China
Zitieren
APA
Zhang, H., Chen, F., Li, Z., Hu, W., Sun, T., & Zhang, J. (2023). Investigation of Laser-Assisted Micro-Milling Process of Inconel 718. Journal of Manufacturing and Materials Processing, 7(4), 149. https://doi.org/10.3390/jmmp7040149
Vancouver
Zhang H, Chen F, Li Z, Hu W, Sun T, Zhang J. Investigation of Laser-Assisted Micro-Milling Process of Inconel 718. Journal of Manufacturing and Materials Processing. 2023;7(4):149. doi:10.3390/jmmp7040149
BibTeX
@article{Zhang2023,
author = {Zhang, Haijun and Chen, Fei and Li, Zengqiang and Hu, Wangjie and Sun, Tao and Zhang, Junjie},
title = {Investigation of Laser-Assisted Micro-Milling Process of Inconel 718},
journal = {Journal of Manufacturing and Materials Processing},
year = {2023},
volume = {7},
number = {4},
pages = {149},
doi = {10.3390/jmmp7040149}
}
EUVIMED