EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a Low-Cost Spring-Loaded Tensile Creep Testing Apparatus for Multi-Material Analysis

Rahool Rai, Mohsin Sattar, Emine Gündoğdu İş, Jan Hosek, Robert Hunady, Asad A. Zaidi, Maaz Akhtar, Muhammad Muzamil

Metals · 10.11.2026 · 16 (11) · 1238

DOI: 10.3390/met16111238 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 10.11.2026. Verfasst von Rahool Rai und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Materials and Technologies for Sustainable Development (MATUR) Jan Amos Komensky Operational Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Creep testing is essential for characterizing the time-dependent deformation of engineering materials, but conventional testing systems can be costly and complex, limiting their use in teaching laboratories and small-scale research facilities. This study presents the design, fabrication, and experimental validation of a low-cost spring-loaded tensile creep testing apparatus developed for educational applications and preliminary material investigations. The apparatus was designed in SolidWorks and fabricated using locally available components, with a calibrated spring mechanism providing sustained tensile loading while minimizing system complexity and energy consumption. Its performance was evaluated through 120 h tensile creep tests on nylon, unplasticized polyvinyl chloride (UPVC), lead, and medium-density polyethylene (MDPE) under ambient conditions of 29–33 °C and 60–65% relative humidity, following the general recommendations of ASTM E139-11 and ISO 204. The measured creep strains after 120 h were 10.92%, 6.08%, 10.00%, and 4.00% for nylon, UPVC, lead, and MDPE, respectively, compared with theoretical values of 11%, 5%, 9.16%, and 3.006%. The corresponding relative errors were 0.7%, 21.6%, 9.2%, and 33.1%. The observed deformation responses exhibited characteristic creep behaviour, demonstrating the apparatus’s ability to capture time-dependent deformation across materials with different mechanical characteristics. The discrepancies between experimental and theoretical results, particularly for UPVC and MDPE, highlight the influence of material variability, nonlinearity, environmental conditions, and the absence of replicate measurements. Although the developed apparatus reliably captures basic creep behavior and distinguishes material trends, ambient thermal variations and baseline sensor drift limit its measurement precision. Consequently, while the platform is well-suited for hands-on instruction and initial material screening, rigorous sensor calibration, environmental shielding, and statistical replication remain mandatory before the generated data can support safety-critical engineering applications.

Förderung

  • Materials and Technologies for Sustainable Development (MATUR) Jan Amos Komensky Operational Program

Zitieren

APA

Rai, R., Sattar, M., İş, E. G., Hosek, J., Hunady, R., Zaidi, A. A., Akhtar, M., & Muzamil, M. (2026). Development of a Low-Cost Spring-Loaded Tensile Creep Testing Apparatus for Multi-Material Analysis. Metals, 16(11), 1238. https://doi.org/10.3390/met16111238

Vancouver

Rai R, Sattar M, İş EG, Hosek J, Hunady R, Zaidi AA, et al. Development of a Low-Cost Spring-Loaded Tensile Creep Testing Apparatus for Multi-Material Analysis. Metals. 2026;16(11):1238. doi:10.3390/met16111238

BibTeX
@article{Rai2026,
  author = {Rai, Rahool and Sattar, Mohsin and İş, Emine Gündoğdu and Hosek, Jan and Hunady, Robert and Zaidi, Asad A. and Akhtar, Maaz and Muzamil, Muhammad},
  title = {Development of a Low-Cost Spring-Loaded Tensile Creep Testing Apparatus for Multi-Material Analysis},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1238},
  doi = {10.3390/met16111238}
}
Kostenlos starten →