EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Multi-Gage-Length Tensile Specimen for Simultaneous Multi-Strain-Rate Testing

Javier Geiser iD, César Garrido iD, Rodrigo Valle iD, Víctor Tuninetti iD

Materials · 01.11.2026 · 19 (21) · 4660

DOI: 10.3390/ma19214660 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.11.2026. Verfasst von Javier Geiser und 3 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Program, Universidad de La Frontera, Temuco 4811230, Chile. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Nacional de Investigación y Desarrollo.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Characterizing the strain-rate sensitivity of metallic alloys is critical for developing accurate constitutive models, yet traditional sequential methodologies inevitably introduce complex transient history effects. This study proposes a novel Multi-Gage Length (MGL) tensile specimen designed to overcome these limitations by inducing a simultaneous multi-rate kinematic spectrum within a single testing event. Functioning as a multi-ligament array, the geometry is designed to generate different local engineering strain rates across sub-gages of varying lengths within a single loading event. The methodology was validated using SAE 1020 low-carbon steel, with apparent macroscopic responses aligning with established monotonic loading models. Digital image correlation was employed for kinematic tracking; although full-field mapping was constrained by pixel-resolution boundaries in narrow ligaments, a point-to-point virtual extensometer approach successfully captured a nearly six-fold strain rate divergence between central and peripheral sections. Experimental results further identified a critical boundary condition regarding universal testing machine acceleration, revealing that failure in high-speed nominal trials often occurs entirely within the acceleration phase. Supporting rate-independent finite-element analysis revealed heterogeneous deformation and evolving strain-rate ratios, establishing stage-dependent kinematic partitioning among the ligaments. Ultimately, this framework increases experimental information density and provides a potential basis for future inverse finite-element identification of rate-dependent constitutive parameters.

Schlagwörter

Stichwörter der Autor:innen

constitutive parameter identificationdigital image correlation (DIC)heterogeneous strain fieldsintermediate strain ratestransient history effectsvirtual extensometry

Autor:innen und Institutionen

  • Mechanical Engineering Program, Universidad de La Frontera, Temuco 4811230, Chile.
  • Department of Mechanical Engineering, Universidad del Bío-Bío, Concepción 4081112, Chile.
  • Construction Multidisciplinary Research Group, Facultad de Arquitectura, Construcción y Medio Ambiente, Universidad Autónoma de Chile, Talca 3460000, Chile.
  • Department of Mechanical Engineering, Universidad de La Frontera, Temuco 4811230, Chile.

ORCID-Profile: Javier Geiser, César Garrido, Rodrigo Valle, Víctor Tuninetti

Förderung

  • Agencia Nacional de Investigación y Desarrollo

Zitieren

APA

Geiser, J., Garrido, C., Valle, R., & Tuninetti, V. (2026). A Multi-Gage-Length Tensile Specimen for Simultaneous Multi-Strain-Rate Testing. Materials, 19(21), 4660. https://doi.org/10.3390/ma19214660

Vancouver

Geiser J, Garrido C, Valle R, Tuninetti V. A Multi-Gage-Length Tensile Specimen for Simultaneous Multi-Strain-Rate Testing. Materials. 2026;19(21):4660. doi:10.3390/ma19214660

BibTeX
@article{Geiser2026,
  author = {Geiser, Javier and Garrido, César and Valle, Rodrigo and Tuninetti, Víctor},
  title = {A Multi-Gage-Length Tensile Specimen for Simultaneous Multi-Strain-Rate Testing},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4660},
  doi = {10.3390/ma19214660}
}
Kostenlos starten →