EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Performance Porous High-Nitrogen Nickel-Free Austenitic Stainless Steel via High-Vacuum Reduction Sintering Combined with Solution Nitriding

Xiaohui Liu, Weipeng Zhang, Zhuoran Li, Xinkui Zhang, Songjun Chen, Zhengwu Peng, Liejun Li

Metals · 10.11.2026 · 16 (11) · 1233

DOI: 10.3390/met16111233 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 10.11.2026. Verfasst von Xiaohui Liu und 6 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Porous high-nitrogen nickel-free austenitic stainless steel (PHNASS) combines low elastic modulus with high strength and corrosion resistance, but thermodynamically stable oxides on powder particle surfaces weaken sintering-neck bonding and hinder nitrogen ingress. Here, PHNASS was prepared from Cr–Mn stainless steel powder with 40 vol.% NH4HCO3 as the space holder via high-vacuum reduction sintering (1200–1300 °C, ≤1 × 10−3 Pa) followed by solution nitriding at 1150 °C. Compared with ordinary-vacuum sintering, high vacuum removes the Cr/Mn surface oxides (including spinel MnCr2O4) through carbothermal reduction, yielding clean, well-developed sintering necks and promoting nitrogen dissolution (relative XPS peak-area fraction of solid-solution nitrogen rising from 42% to 61%). The nitrided matrix is fully austenitic, with dispersed fine, equiaxed Cr2N precipitates (200–400 nm); selective Mn volatilization produces a surface-to-interior Mn gradient and, most probably, Kirkendall-type micropores, whereas nitrogen remains uniform. At 42.5% porosity, the 1300 °C sample exhibits a compressive yield strength of 378 MPa and a peak compressive stress (after substantial densification) of 2160 MPa at 42.6% fracture strain (5.4 times the ordinary-vacuum counterpart); its corrosion current density in 3.5 wt.% NaCl is 1.78 × 10−6 A·cm−2, 4.5 times lower. High-vacuum oxide reduction thus activates sintering-neck formation and nitrogen alloying simultaneously, providing a basis for PHNASS process optimization.

Zitieren

APA

Liu, X., Zhang, W., Li, Z., Zhang, X., Chen, S., Peng, Z., & Li, L. (2026). High-Performance Porous High-Nitrogen Nickel-Free Austenitic Stainless Steel via High-Vacuum Reduction Sintering Combined with Solution Nitriding. Metals, 16(11), 1233. https://doi.org/10.3390/met16111233

Vancouver

Liu X, Zhang W, Li Z, Zhang X, Chen S, Peng Z, et al. High-Performance Porous High-Nitrogen Nickel-Free Austenitic Stainless Steel via High-Vacuum Reduction Sintering Combined with Solution Nitriding. Metals. 2026;16(11):1233. doi:10.3390/met16111233

BibTeX
@article{Liu2026,
  author = {Liu, Xiaohui and Zhang, Weipeng and Li, Zhuoran and Zhang, Xinkui and Chen, Songjun and Peng, Zhengwu and Li, Liejun},
  title = {High-Performance Porous High-Nitrogen Nickel-Free Austenitic Stainless Steel via High-Vacuum Reduction Sintering Combined with Solution Nitriding},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {1233},
  doi = {10.3390/met16111233}
}
Kostenlos starten →