EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Nitriding Behaviour and Microstructure of High-Nitrogen Stainless Steel during Selective Laser Melting

Xin Sun iD, Jianbiao Ren, Yachao Wang, Dingguo Zhao, Shuhuan Wang, Xiaojing Xiong, Jeremy Heng Rao iD

Materials · 21.03.2023 · 16 (6) · 2505

DOI: 10.3390/ma16062505 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.03.2023. Verfasst von Xin Sun und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgy and Energy, North China University of Science and Technology, Tangshan 063009, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hebei Province, Research project of basic scientific research expenses of Hebei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-nitrogen stainless steels are widely used due to their excellent comprehensive performance. In this study, the effects of process parameters (laser power, scanning speed, and cavity pressure) on the formation of high-nitrogen stainless steels were studied by using conventional selective laser melting and high-pressure selective laser melting (HPSLM). The nitrogen content, nitrogen emission, phase composition, microstructure, and microhardness of the high-nitrogen stainless steel samples obtained through selective laser melting (SLM) were analysed by using an oxygen/nitrogen/hydrogen analyser, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and electron backscatter diffraction. The results showed that the maximum nitrogen emission in the SLM sample was 0.175 wt.%, the emission rate reached up to 54.7%, and the maximum nitrogen content in the HPSLM sample was 1.07 wt.%. There was no significant difference between the phase peak positions of the SLM samples with different laser powers and the original powder. The main phase of the HPSLM sample changed at 0.3 MPa (from α-Fe to γ-Fe phase); the microstructure of the SLM sample was mainly composed of columnar and cellular crystals, and columnar crystal bands formed along the direction of heat flow. The HPSLM sample was mainly composed of equiaxed crystals with a grain size of 10–15 μm. At an energy density of 136 J/mm3, the microhardness and relative density reached their peak values of 409 HV and 98.85%, respectively.

Schlagwörter

Stichwörter der Autor:innen

high-nitrogen stainless steelmicrohardnessmicrostructurenitrogen contentselective laser melting

Autor:innen und Institutionen

  • School of Metallurgy and Energy, North China University of Science and Technology, Tangshan 063009, China.
  • Ji Hua Laboratory, Institute of Advanced Additive Manufacturing, Foshan 528200, China.

ORCID-Profile: Xin Sun, Jeremy Heng Rao

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Hebei Province
  • Research project of basic scientific research expenses of Hebei Province

Zitieren

APA

Sun, X., Ren, J., Wang, Y., Zhao, D., Wang, S., Xiong, X., & Rao, J. H. (2023). Nitriding Behaviour and Microstructure of High-Nitrogen Stainless Steel during Selective Laser Melting. Materials, 16(6), 2505. https://doi.org/10.3390/ma16062505

Vancouver

Sun X, Ren J, Wang Y, Zhao D, Wang S, Xiong X, et al. Nitriding Behaviour and Microstructure of High-Nitrogen Stainless Steel during Selective Laser Melting. Materials. 2023;16(6):2505. doi:10.3390/ma16062505

BibTeX
@article{Sun2023,
  author = {Sun, Xin and Ren, Jianbiao and Wang, Yachao and Zhao, Dingguo and Wang, Shuhuan and Xiong, Xiaojing and Rao, Jeremy Heng},
  title = {Nitriding Behaviour and Microstructure of High-Nitrogen Stainless Steel during Selective Laser Melting},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {6},
  pages = {2505},
  doi = {10.3390/ma16062505}
}
Kostenlos starten →