Application of SnAg5 Solder in Resistance Element Soldering Technology
Metals · 30.10.2026 · 16 (11) · 1201
DOI: 10.3390/met16111201 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 30.10.2026. Verfasst von Pavol Sejč und 5 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Research, Development and Youth of the Slovak Republic, University Science Park of the Slovak University of Technology in Bratislava, Advancing University Capacity and Competence in Research, Development and Innovation.
Abstract (Originalsprache)
This study evaluates the applicability of lead-free SnAg5 solder in Resistance Element Soldering (RES) technology for joining an AISI 304 stainless steel sheet and a PMMA (polymethyl methacrylate) thermoplastic. The microstructure and properties of the resulting soldered joints were assessed. By utilizing Chemet CHM-A-014 flux, excellent wettability of the SnAg5 solder on the AISI 304 steel sheet surface was observed at 275 °C, achieving a contact angle of 3.5°. During resistance heating with the selected parameters, only a specific volume of solder in the core of the Cu/SnAg5 bimetallic elements was consistently remelted. Mechanical testing of the RES joints revealed that shear strength ranged from 26.66 to 39.32 MPa, which corresponds to 62–92% of the solder’s bulk shear strength. Joint failure occurred predominantly within the solder and partially at the steel/solder interface, with the fracture surfaces exhibiting a ductile character. Finally, XRD analysis confirmed that the dominant fracture path propagated through the solder, identifying the presence of FeSn2 and Fe2Sn intermetallic phases on the fracture surfaces.
Förderung
- Ministry of Education, Research, Development and Youth of the Slovak Republic
- University Science Park of the Slovak University of Technology in Bratislava
- Advancing University Capacity and Competence in Research, Development and Innovation
Zitieren
APA
Sejč, P., Švec, P., Gogola, P., Vanko, B., Gábrišová, Z., & Schrek, A. (2026). Application of SnAg5 Solder in Resistance Element Soldering Technology. Metals, 16(11), 1201. https://doi.org/10.3390/met16111201
Vancouver
Sejč P, Švec P, Gogola P, Vanko B, Gábrišová Z, Schrek A. Application of SnAg5 Solder in Resistance Element Soldering Technology. Metals. 2026;16(11):1201. doi:10.3390/met16111201
BibTeX
@article{Sej2026,
author = {Sejč, Pavol and Švec, Pavol and Gogola, Peter and Vanko, Branislav and Gábrišová, Zuzana and Schrek, Alexander},
title = {Application of SnAg5 Solder in Resistance Element Soldering Technology},
journal = {Metals},
year = {2026},
volume = {16},
number = {11},
pages = {1201},
doi = {10.3390/met16111201}
}
EUVIMED