EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structure and Properties of Stainless Steel–Thermoplastic Joints Made Using Resistance Element Soldering Technology

Pavol Sejč, Pavol Švec, Peter Gogola, Branislav Vanko, Zuzana Gábrišová, Alexander Schrek, Miroslav Zelina

Metals · 20.12.2025 · 16 (1) · 6

DOI: 10.3390/met16010006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 20.12.2025. Verfasst von Pavol Sejč und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Research, Development and Youth of the Slovak Republic VEGA, University Science Park of the Slovak University of Technology in Bratislava, Advancing University Capacity and Competence in Research, Development and Innovation, Accord 2.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the microstructure and properties of soldered joints of AISI 304 stainless steel and PMMA thermoplastic or AW-1050A aluminum alloys made using Resistance Element Soldering (RES) technology. The bimetallic element used in RES provided a mechanical joint with a thermoplastic or aluminum alloy and a soldered joint with AISI 304 steel using Sn60Pb40 solder in the core of the element. The solder in combination with the Chemet CHM-A-014 flux wetted the AISI 304 steel surface very well at a temperature of 225 °C with a contact angle of 14°. During the production of the joints, the solder melted in the bimetallic element on the AISI 304 steel side, while solid solder was retained at the point of contact with the welding electrode. The strength of the joints ranged from 25.5 to 36.4 MPa, which was less than the strength of the solder, and the joints failed at the AISI 304 steel–Sn60Pb40 solder interface. The fracture surface was predominantly formed by the solder. An intermetallic phase of FeSn2 was identified at the interface.

Förderung

  • Ministry of Education, Research, Development and Youth of the Slovak Republic VEGA
  • University Science Park of the Slovak University of Technology in Bratislava
  • Advancing University Capacity and Competence in Research, Development and Innovation, Accord 2

Zitieren

APA

Sejč, P., Švec, P., Gogola, P., Vanko, B., Gábrišová, Z., Schrek, A., & Zelina, M. (2025). Structure and Properties of Stainless Steel–Thermoplastic Joints Made Using Resistance Element Soldering Technology. Metals, 16(1), 6. https://doi.org/10.3390/met16010006

Vancouver

Sejč P, Švec P, Gogola P, Vanko B, Gábrišová Z, Schrek A, et al. Structure and Properties of Stainless Steel–Thermoplastic Joints Made Using Resistance Element Soldering Technology. Metals. 2025;16(1):6. doi:10.3390/met16010006

BibTeX
@article{Sej2025,
  author = {Sejč, Pavol and Švec, Pavol and Gogola, Peter and Vanko, Branislav and Gábrišová, Zuzana and Schrek, Alexander and Zelina, Miroslav},
  title = {Structure and Properties of Stainless Steel–Thermoplastic Joints Made Using Resistance Element Soldering Technology},
  journal = {Metals},
  year = {2025},
  volume = {16},
  number = {1},
  pages = {6},
  doi = {10.3390/met16010006}
}
Kostenlos starten →