Optimization Study on the Process Parameters for Molybdenum Milling
Metals · 21.08.2026 · 16 (8) · 935
DOI: 10.3390/met16080935 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 21.08.2026. Verfasst von Xian Meng und 7 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Strategic Priority Research Program of the Chinese Academy of Sciences, National Natural Science Foundation of China.
Abstract (Originalsprache)
Molybdenum (Mo), owing to its excellent properties, is widely used as a plasma-facing material and is recognized as a typical difficult-to-machine material. Achieving high-quality, low-damage machining is essential for ensuring the service reliability of Mo components. However, studies on the milling of Mo remain limited. Therefore, this study investigates a high-quality, low-damage milling technique for Mo based on analyses of milling force, machined surface roughness, and white layer formation. First, the effects of machining parameters, including radial depth of cut (ae), spindle speed (n), and feed per tooth (fz), on the responses, namely milling force (F) and surface roughness (Ra), were investigated. The relationships between milling force, surface roughness, and white layer formation were analyzed. Subsequently, the response surface methodology (RSM) was employed to reveal the influence mechanisms of the machining parameters and their interactions on the response variables. Finally, a Kriging surrogate model integrated with the Non-dominated Sorting Genetic Algorithm II (NSGA-II) was adopted to identify the optimal machining parameter combination for high-quality, low-damage milling. The results indicate that the milling force and white-layer thickness exhibit consistent increasing trends with increasing feed per tooth under the investigated conditions, demonstrating that controlling the milling force is an effective approach for achieving high-quality, low-damage milling of Mo. For the simultaneous minimization of milling force and surface roughness, the optimal machining parameters were determined to be a radial depth of cut of 0.2101 mm, a spindle speed of 10,090.7 rpm, and a feed per tooth of 0.01 mm/z. These findings provide valuable process parameter guidance for the precision machining of Mo components.
Förderung
- Strategic Priority Research Program of the Chinese Academy of Sciences
- National Natural Science Foundation of China
Zitieren
APA
Meng, X., Xu, H., Li, H., Cao, J., Geng, J., Yan, C., Cheng, X., & Huang, H. (2026). Optimization Study on the Process Parameters for Molybdenum Milling. Metals, 16(8), 935. https://doi.org/10.3390/met16080935
Vancouver
Meng X, Xu H, Li H, Cao J, Geng J, Yan C, et al. Optimization Study on the Process Parameters for Molybdenum Milling. Metals. 2026;16(8):935. doi:10.3390/met16080935
BibTeX
@article{Meng2026,
author = {Meng, Xian and Xu, Hao and Li, Haochen and Cao, Jinwen and Geng, Jinyue and Yan, Cong and Cheng, Xiang and Huang, Heji},
title = {Optimization Study on the Process Parameters for Molybdenum Milling},
journal = {Metals},
year = {2026},
volume = {16},
number = {8},
pages = {935},
doi = {10.3390/met16080935}
}
EUVIMED