EUVIMEDEUVIMED entdecken
Crossref

Research on Optimization of CNC Milling Process Parameters Based on Carbon Emission

Juan Wei, Yaxin Wei, Mengdi Wei, Simin Ren

Journal of Electrical and Electronic Engineering · 27.06.2023 · 11 (3) · 77-81

DOI: 10.11648/j.jeee.20231103.12 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Electrical and Electronic Engineering, online erschienen am 27.06.2023. Verfasst von Juan Wei und 3 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to achieve the low carbon and efficient working effect of CNC machine tools, this paper takes the 2243 VMC machining centre as the research object to study the problem between carbon emission and time, cost and process parameters in the machining process of machining centre machine tools, and establish the optimization model of CNC milling process parameters based on carbon emission. Carbon emissions, machining cost and machining time are taken as the optimisation objectives, tool life, roughness and machine power are taken as constraints, and spindle speed, feed per tooth, cutting width and depth of cut are taken as optimisation variables. The model is solved using a particle swarm algorithm (PSO) to produce a Pareto solution set for multi-objective optimisation. Finally, the optimisation results were compared with the calculated results for the empirical parameters to verify the feasibility of the model. The results show that the calculated results for the optimised parameters provide a 19.53% reduction in carbon emissions, a 12.96% reduction in processing costs and a 13.72% reduction in processing time after optimisation by the algorithm compared to the calculated results for the empirical parameters, indicating that the algorithm provides a better optimisation than the empirical parameters.

Zitieren

APA

Wei, J., Wei, Y., Wei, M., & Ren, S. (2023). Research on Optimization of CNC Milling Process Parameters Based on Carbon Emission. Journal of Electrical and Electronic Engineering, 11(3), 77-81. https://doi.org/10.11648/j.jeee.20231103.12

Vancouver

Wei J, Wei Y, Wei M, Ren S. Research on Optimization of CNC Milling Process Parameters Based on Carbon Emission. Journal of Electrical and Electronic Engineering. 2023;11(3):77-81. doi:10.11648/j.jeee.20231103.12

BibTeX
@article{Wei2023,
  author = {Wei, Juan and Wei, Yaxin and Wei, Mengdi and Ren, Simin},
  title = {Research on Optimization of CNC Milling Process Parameters Based on Carbon Emission},
  journal = {Journal of Electrical and Electronic Engineering},
  year = {2023},
  volume = {11},
  number = {3},
  pages = {77--81},
  doi = {10.11648/j.jeee.20231103.12}
}
Kostenlos starten →