Monitoring of Steel Road Barrier Flange by the Use of Barkhausen Noise as a Function of Its Yielding
Metals · 09.07.2026 · 16 (7) · 763
DOI: 10.3390/met16070763 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 09.07.2026. Verfasst von Katarína Zgútová und 4 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VEGA.
Abstract (Originalsprache)
This study investigates the sensitivity of Barkhausen noise emission against the stress state as well as microstructure alterations in the steel road barrier flange. The stress state is altered with respect to its residual state after the tensile test, as well as in the tensile and compression regions during the bending test. In order to provide deeper insight into the relationship between stress states, the Barkhausen noise and magnetostriction along two perpendicular directions is measured as well. The microstructure is expressed in terms of the dislocation density altered beyond the yield point. It was found that the increasing yielding during the tensile test reduces the bearing capacity of the flange as well as the notch toughness, and increases the dislocation density. The Barkhausen noise along the flange length exhibits a continuous descent with yielding due to the increased dislocation density, whereas this emission in the perpendicular direction increases due to the realignment of domain walls. The magnetostriction along the flange length is strong and positive, linked with the increasing Barkhausen noise along the flange length due to the tensile stresses, as contrasted against much the weaker magnetostriction along the perpendicular direction and the reversed evolution of the Barkhausen noise. However, the correlation between the MBN and magnetostriction is not straightforward; the systematic evolution of Barkhausen noise alterations as a function of plastic strain is fully missing.
Förderung
- VEGA
Zitieren
APA
Zgútová, K., Kubjatko, T., Ondruš, J., Pitoňák, M., & Neslušan, M. (2026). Monitoring of Steel Road Barrier Flange by the Use of Barkhausen Noise as a Function of Its Yielding. Metals, 16(7), 763. https://doi.org/10.3390/met16070763
Vancouver
Zgútová K, Kubjatko T, Ondruš J, Pitoňák M, Neslušan M. Monitoring of Steel Road Barrier Flange by the Use of Barkhausen Noise as a Function of Its Yielding. Metals. 2026;16(7):763. doi:10.3390/met16070763
BibTeX
@article{Zgtov2026,
author = {Zgútová, Katarína and Kubjatko, Tibor and Ondruš, Ján and Pitoňák, Martin and Neslušan, Miroslav},
title = {Monitoring of Steel Road Barrier Flange by the Use of Barkhausen Noise as a Function of Its Yielding},
journal = {Metals},
year = {2026},
volume = {16},
number = {7},
pages = {763},
doi = {10.3390/met16070763}
}
EUVIMED