EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultrasonic Vibration-Assisted Plasma Cladding of Fe-Cr-C-Based Coatings: Microstructural Regulation and Wear Resistance Enhancement

Yubing Xu, Ding Zhang, Kai Li, Chao Tian, Shanhui Li, Ping Zhang, Zhe Ji, Chengjin Shen

Metals · 05.07.2026 · 16 (7) · 740

DOI: 10.3390/met16070740 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 05.07.2026. Verfasst von Yubing Xu und 7 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fe-Cr-C-based coatings were fabricated on Q690 steel via ultrasonic vibration-assisted plasma cladding at varying ultrasonic powers (0–65 W) with a fixed frequency of 18.5 kHz. The coatings primarily consisted of martensite, retained austenite, and (Cr,Fe)7C3 carbides, along with (Cr,Fe,Mo)-B borides along grain boundaries. Increasing ultrasonic power promoted cavitation and acoustic streaming, which refined columnar dendrites, reduced elemental segregation (notably for B and Mo), and increased the fraction of fine equiaxed grains without altering phase composition. As a result, the average microhardness increased from 797.1 to 828.5 HV0.1. The friction coefficient decreased from 0.675 to 0.626, while the wear-track width, wear depth, and wear mass loss decreased from 4.0 mm to 2.5 mm, from 112.5 μm to 32.4 μm, and from 20.40 mg to 4.75 mg, respectively. The wear mechanism shifted from severe adhesive wear to mild abrasive wear. These results demonstrate that increasing ultrasonic vibration power effectively refines the solidification microstructure and significantly improves the hardness and wear resistance of plasma-clad Fe-Cr-C-based coatings.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Xu, Y., Zhang, D., Li, K., Tian, C., Li, S., Zhang, P., Ji, Z., & Shen, C. (2026). Ultrasonic Vibration-Assisted Plasma Cladding of Fe-Cr-C-Based Coatings: Microstructural Regulation and Wear Resistance Enhancement. Metals, 16(7), 740. https://doi.org/10.3390/met16070740

Vancouver

Xu Y, Zhang D, Li K, Tian C, Li S, Zhang P, et al. Ultrasonic Vibration-Assisted Plasma Cladding of Fe-Cr-C-Based Coatings: Microstructural Regulation and Wear Resistance Enhancement. Metals. 2026;16(7):740. doi:10.3390/met16070740

BibTeX
@article{Xu2026,
  author = {Xu, Yubing and Zhang, Ding and Li, Kai and Tian, Chao and Li, Shanhui and Zhang, Ping and Ji, Zhe and Shen, Chengjin},
  title = {Ultrasonic Vibration-Assisted Plasma Cladding of Fe-Cr-C-Based Coatings: Microstructural Regulation and Wear Resistance Enhancement},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {740},
  doi = {10.3390/met16070740}
}
Kostenlos starten →