Laser Cladding Fabrication of Self-Lubricating High-Wear-Resistance Coatings: Microstructural Evolution and Wear Mechanisms
Lubricants · 08.06.2026 · 14 (6) · 231
DOI: 10.3390/lubricants14060231 ↗Kurz gefasst
Fachartikel in der Zeitschrift Lubricants, online erschienen am 08.06.2026. Verfasst von Linkai He und 6 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shaoxing Science and Technology Plan Project, Central Government Funding Program for Guiding Local Science and Technology Development.
Abstract (Originalsprache)
In pursuit of a composite coating for tunnel boring machine (TBM) disc cutters that offers both high wear resistance and self-lubricating functionality, we fabricated Fe-based composite coatings reinforced with WC and MoS2 through laser cladding. Seven coating compositions with systematically tailored MoS2 contents were prepared to investigate the concentration-dependent effects of MoS2 on microstructural evolution and tribological properties, and to evaluate their performance under various rock-contact conditions. XPS results reveal that MoS2 decomposed during laser cladding, leading to the in situ formation of metal sulfides in the Fe-based matrix. These sulfides, characterized by low shear strength, readily form a continuous and stable lubricating tribofilm at the hob–rock interface. The tribofilm effectively lowers the coefficient of friction (COF), curtails friction-induced energy dissipation and surface degradation, and ultimately enhances the wear resistance of the disc cutter. Simultaneously, the rapid non-equilibrium solidification inherent in laser cladding stabilizes metastable phases, which refine the microstructure, improve densification, and bolster phase stability. Among the tested compositions, the coating containing 4 wt.% MoS2 exhibited the most favorable dry-sliding tribological performance, as evidenced by an average coefficient of friction of 0.409, a hardness of 749.5 HV1, and consistently low wear mass losses below 2.1 × 10−3 g under different rock-contact conditions. Mechanistically, XRD and SEM analyses further attributed the superior performance of the 4 wt.% MoS2 coating to concurrent strengthening mechanisms: grain refinement, dispersion strengthening from uniformly distributed second-phase particles, and increased dislocation density. Collectively, these effects substantially improve the wear resistance of the disc cutter, thereby extending its durability and service life under complex operating conditions.
Förderung
- National Natural Science Foundation of China
- Shaoxing Science and Technology Plan Project
- Central Government Funding Program for Guiding Local Science and Technology Development
- Zhejiang Province International Science and Technology Cooperation Base Open Fund Project
Zitieren
APA
He, L., Wu, X., Chen, Z., Zhang, K., Men, Q., Tian, Y., & Yu, M. (2026). Laser Cladding Fabrication of Self-Lubricating High-Wear-Resistance Coatings: Microstructural Evolution and Wear Mechanisms. Lubricants, 14(6), 231. https://doi.org/10.3390/lubricants14060231
Vancouver
He L, Wu X, Chen Z, Zhang K, Men Q, Tian Y, et al. Laser Cladding Fabrication of Self-Lubricating High-Wear-Resistance Coatings: Microstructural Evolution and Wear Mechanisms. Lubricants. 2026;14(6):231. doi:10.3390/lubricants14060231
BibTeX
@article{He2026,
author = {He, Linkai and Wu, Xingqiang and Chen, Zhenneng and Zhang, Kaiqiang and Men, Qingnan and Tian, Yun and Yu, Meilu},
title = {Laser Cladding Fabrication of Self-Lubricating High-Wear-Resistance Coatings: Microstructural Evolution and Wear Mechanisms},
journal = {Lubricants},
year = {2026},
volume = {14},
number = {6},
pages = {231},
doi = {10.3390/lubricants14060231}
}
EUVIMED