EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Progress in Melting-Flow Characteristics of Titanium-Bearing Blast Furnace Slag

Guang Li, Shuai Wang, Yufeng Guo, Mao Chen, Yihan Huang, Feng Chen, Jinlai Zhang, Lingzhi Yang

Metals · 27.06.2026 · 16 (7) · 707

DOI: 10.3390/met16070707 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 27.06.2026. Verfasst von Guang Li und 7 weiteren Autor:innen. Die Arbeit nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Vanadium–titanium magnetite is a critical strategic polymetallic mineral resource in China, and blast furnace smelting represents the dominant large-scale industrial process for its utilization. The melting and fluidity properties of titanium-bearing blast furnace slags (TBFS) directly govern stable blast furnace operation and the recovery efficiency of vanadium–titanium resources. This paper systematically reviews research progress on the melting and flow characteristics of TBFS. The influences of main components (TiO2, CaO/SiO2, MgO, Al2O3), trace oxides, and strongly reduced products TiC and TiN on slag mineral phases, break point temperature (TBr) and viscosity are summarized. Combined with X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman characterizations and FactSage thermodynamic calculations, the inherent mechanisms are revealed from the perspectives of microstructural network polymerization and crystalline phase precipitation. TiO2 exerts dual effects: it depolymerizes the silicate network to reduce slag viscosity while promoting the precipitation of high-melting-point perovskite. Al2O3 intensifies network polymerization and impairs slag fluidity. MgO, basicity, MnO and BaO can decrease slag viscosity. Solid particles of TiC and TiN generated under the strong reducing atmosphere inside blast furnaces drastically increase slag viscosity and Tbr. This paper proposes that future research should focus on slag systems with higher TiO2 contents, so as to provide theoretical support for the high-efficiency blast furnace smelting of VTM and resource utilization of titanium-bearing slags.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, G., Wang, S., Guo, Y., Chen, M., Huang, Y., Chen, F., Zhang, J., & Yang, L. (2026). Progress in Melting-Flow Characteristics of Titanium-Bearing Blast Furnace Slag. Metals, 16(7), 707. https://doi.org/10.3390/met16070707

Vancouver

Li G, Wang S, Guo Y, Chen M, Huang Y, Chen F, et al. Progress in Melting-Flow Characteristics of Titanium-Bearing Blast Furnace Slag. Metals. 2026;16(7):707. doi:10.3390/met16070707

BibTeX
@article{Li2026,
  author = {Li, Guang and Wang, Shuai and Guo, Yufeng and Chen, Mao and Huang, Yihan and Chen, Feng and Zhang, Jinlai and Yang, Lingzhi},
  title = {Progress in Melting-Flow Characteristics of Titanium-Bearing Blast Furnace Slag},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {7},
  pages = {707},
  doi = {10.3390/met16070707}
}
Kostenlos starten →