EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Progress and Prospects for Titanium Extraction from Titanium-Bearing Blast Furnace Slag

Yuxuan Qu, Lei Xing, Minglei Gao, Suxing Zhao, Qianqian Ren, Lanjie Li, Yue Long

Materials · 23.12.2024 · 17 (24) · 6291

DOI: 10.3390/ma17246291 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 23.12.2024. Verfasst von Yuxuan Qu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgy and Energy Engineering, North China University of Science and Technology, Tangshan 063000, China. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China, the Hebei Province Outstanding Youth Science Foundation Project, Yanzhao Young Scientist Project of Hebei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The composition of TBFS is complex. It is categorized into low (W(TiO2) < 5%), medium (5% < W(TiO2) < 20%), and high-titanium slag (W(TiO2) > 20%) based on Ti content. The titanium in the slag is underutilized, causing it to accumulate and contribute to environmental pollution. Current methods for extracting titanium from TBFS include acid leaching, alkali fusion roasting, high-temperature carbonation–low-temperature chlorination, electrochemical molten salt electrolysis, and selective enrichment. However, these methods still face challenges such as environmental impact, high costs, low Ti recovery, and low Ti grade. This paper summarizes the mechanisms and characteristics of the above methods. Future research should focus on integrating pyrometallurgy with beneficiation processes, followed by further purification of titanium-rich phases through hydrometallurgy. Additionally, combining this with novel separation technologies (such as microwave and superconducting magnetic separation) will optimize the dissociation of titanium-bearing phases after enrichment.

Schlagwörter

Stichwörter der Autor:innen

direct utilizationhigh-temperature carbothermic–low-temperature chlorinationintegrated smeltingtitanium componentstitanium-bearing blast furnace slag

Autor:innen und Institutionen

  • School of Metallurgy and Energy Engineering, North China University of Science and Technology, Tangshan 063000, China.
  • HBIS Material Technology Research Institute, Shijiazhuang 050023, China.

Förderung

  • the National Natural Science Foundation of China
  • the Hebei Province Outstanding Youth Science Foundation Project
  • Yanzhao Young Scientist Project of Hebei Province
  • Hebei Province special project of major scientific and technological achievements transformation
  • National Natural Science Foundation of China
  • Hebei Province Outstanding Youth Science Foundation Project

Zitieren

APA

Qu, Y., Xing, L., Gao, M., Zhao, S., Ren, Q., Li, L., & Long, Y. (2024). Progress and Prospects for Titanium Extraction from Titanium-Bearing Blast Furnace Slag. Materials, 17(24), 6291. https://doi.org/10.3390/ma17246291

Vancouver

Qu Y, Xing L, Gao M, Zhao S, Ren Q, Li L, et al. Progress and Prospects for Titanium Extraction from Titanium-Bearing Blast Furnace Slag. Materials. 2024;17(24):6291. doi:10.3390/ma17246291

BibTeX
@article{Qu2024,
  author = {Qu, Yuxuan and Xing, Lei and Gao, Minglei and Zhao, Suxing and Ren, Qianqian and Li, Lanjie and Long, Yue},
  title = {Progress and Prospects for Titanium Extraction from Titanium-Bearing Blast Furnace Slag},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {24},
  pages = {6291},
  doi = {10.3390/ma17246291}
}
Kostenlos starten →