EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improvement of Weld Strength by Investigation on the Effect of Welding Parameters on the Mechanical and Microstructural Properties of Friction Stir-Welded Al6061 Alloy

Fatmagül Tolun

Metals · 18.06.2026 · 16 (6) · 674

DOI: 10.3390/met16060674 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 18.06.2026. Verfasst von Fatmagül Tolun. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Balikesir University Scientific Research Project Unit.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Al 6061 is widely used in the automotive, aerospace, railway and shipbuilding industries due to its excellent mechanical and metallurgical properties. Friction stir welding is a solid-state method preferred in the welding of Al6061 alloy. In this study, Al 6061 plates with a thickness of 3 mm were joined at tool rotational speeds of 900 and 1120 rpm, feed rates of 50 and 80 mm.min−1, and tilting angles of 0° and 2° by friction stir welding using a tapered pin tool in the Universal Milling Machine. To examine the mechanical properties of welded specimens, tensile tests and microhardness tests were applied to them. The microstructural evolution of the welded zones was studied using an optical microscope and scanning electron microscope, and energy-dispersive X-ray spectroscopy analysis. The tensile test results demonstrate that the specimen welded at 900 rpm tool rotational speed, 2° tilting angle, and 80 mm.min−1 feed rate exhibited the highest welding strength of 243.77 MPa and welding performance of 82.93%, while specimen welded at 1120 rpm tool rotational speed, without tilting angle, and 50 mm.min−1 feed rate exhibited the lowest welding strength of 105.76 MPa and welding performance of 36%.

Förderung

  • Balikesir University Scientific Research Project Unit

Zitieren

APA

Tolun, F. (2026). Improvement of Weld Strength by Investigation on the Effect of Welding Parameters on the Mechanical and Microstructural Properties of Friction Stir-Welded Al6061 Alloy. Metals, 16(6), 674. https://doi.org/10.3390/met16060674

Vancouver

Tolun F. Improvement of Weld Strength by Investigation on the Effect of Welding Parameters on the Mechanical and Microstructural Properties of Friction Stir-Welded Al6061 Alloy. Metals. 2026;16(6):674. doi:10.3390/met16060674

BibTeX
@article{Tolun2026,
  author = {Tolun, Fatmagül},
  title = {Improvement of Weld Strength by Investigation on the Effect of Welding Parameters on the Mechanical and Microstructural Properties of Friction Stir-Welded Al6061 Alloy},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {674},
  doi = {10.3390/met16060674}
}
Kostenlos starten →