Microstructural and mechanical properties of multi-pass rapid cooling friction-stir welded A1050 aluminum alloy
Materials Science and Technology · 27.07.2026
DOI: 10.1177/02670836261472188 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 27.07.2026. Verfasst von Minghao Ran und 6 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Gefördert von: Postgraduate Research & Practice Innovation Program of Jiangsu Province, Basic Research Program of Jiangsu Province, Qinglan Project of Jiangsu Province of China.
Abstract (Originalsprache)
Conventional multi-pass friction stir welding (FSW) often causes thermal softening in pure aluminum joints. This leads to grain coarsening and a marked reduction in dislocation density, limiting the simultaneous achievement of grain refinement and work hardening. To address this issue, a multi-pass rapid cooling friction-stir welding (MPRC-FSW) process was developed using liquid CO 2 as a cooling medium. The objective was to achieve cumulative grain refinement while preserving deformation-induced substructures. 2-mm-thick A1050 pure aluminum plates were welded with up to five overlapping passes under same welding conditions. This approach progressively refines the grain structure while retaining a high dislocation density. After five passes, the average grain size in the stir zone (SZ) decreases from 2.7 μm (1 pass) to 1.3 μm. The kernel average misorientation value, which reflects dislocation density, increases from 0.07° to 0.31°. Microstructural evolution follows a two-stage mechanism. The initial stage is dominated by continuous dynamic recrystallization which refines grains and increases the fraction of high-angle grain boundaries. In the subsequent stage, further passes introduce new dislocation substructures within the ultrafine grains. The yield strength of the SZ reaches 88 MPa, comparable to that of the base material (91 MPa), while elongation exceeds that of the base material, demonstrating improved strength-ductility synergy. This hybrid process effectively overcomes thermal softening in conventional multi-pass FSW by enabling cumulative grain refinement and sustained dislocation strengthening.
Förderung
- Postgraduate Research & Practice Innovation Program of Jiangsu Province
- Basic Research Program of Jiangsu Province
- Qinglan Project of Jiangsu Province of China
Zitieren
APA
Ran, M., Liu, L., Hu, Y., Xu, N., Zhong, C., Song, Q., & Bao, Y. (2026). Microstructural and mechanical properties of multi-pass rapid cooling friction-stir welded A1050 aluminum alloy. Materials Science and Technology. https://doi.org/10.1177/02670836261472188
Vancouver
Ran M, Liu L, Hu Y, Xu N, Zhong C, Song Q, et al. Microstructural and mechanical properties of multi-pass rapid cooling friction-stir welded A1050 aluminum alloy. Materials Science and Technology. 2026. doi:10.1177/02670836261472188
BibTeX
@article{Ran2026,
author = {Ran, Minghao and Liu, Lutao and Hu, Yuanyuan and Xu, Nan and Zhong, Chao and Song, Qining and Bao, Yefeng},
title = {Microstructural and mechanical properties of multi-pass rapid cooling friction-stir welded A1050 aluminum alloy},
journal = {Materials Science and Technology},
year = {2026},
doi = {10.1177/02670836261472188}
}
EUVIMED