Microstructure Evolution, Crystallographic Orientation Regulation and Strength-Ductility Synergy Mechanism of Al-Si-Mg Alloy Synergistically Modified by Rare Earth Y and In Situ ZrB2 Nanoparticles
Metals · 2026-06-14 · 16 (6) · 653
DOI: 10.3390/met16060653 ↗At a glance
Journal article in Metals, published online on 2026-06-14. Written by Youcheng Yue and 5 co-authors. 63 references. The full text is freely available (open access, CC BY 4.0). Funded by: Science and Technology Department of Yunnan Province.
Abstract (original language)
To address the demand for lightweight, high-performance Al-Si-Mg alloys in aerospace and automotive industries, this work proposes a novel synergistic strengthening strategy by combining rare-earth Y microalloying and in situ synthesized ZrB2 nanoparticles to construct a hybrid reinforcement architecture. The effects of Y-ZrB2 additions on the microstructure, crystallographic orientation evolution, and mechanical properties of Al-Si-Mg alloys were systematically investigated via XRD, SEM, EBSD, and tensile/hardness tests. Results show that compared with the base alloy and single-modified alloys, the co-addition of Y and ZrB2 simultaneously enhances mechanical properties and optimizes grain structure. The optimal comprehensive performance is achieved at 0.3 wt.% Y + 2 wt.% ZrB2 after T6 heat treatment, with ultimate tensile strength of 332.87 MPa, yield strength of 271.35 MPa, elongation of 16.24%, and Vickers hardness of 153.9 HV. Phase analysis and SEM-EDS confirm a synergistic coupling relationship between Y-rich phases and ZrB2 nanoparticles. EBSD characterization reveals that Y-ZrB2 modification has negligible effect on the morphology and crystallographic orientation stability of primary α-Al grains, but effectively regulates the lattice rotation, texture redistribution, and growth behavior of eutectic Si. At the optimal composition, the fraction of high-angle grain boundaries (HAGBs) reaches a maximum of 34.3%. Furthermore, the synergistic effect significantly increases the geometrically necessary dislocation (GND) density and reduces the Schmid factor of the dominant {111}⟨110⟩ slip system, thus enhancing dislocation strengthening and plastic deformation resistance. This work clarifies the intrinsic strength-ductility synergy mechanism of Y-ZrB2 co-modified Al-Si-Mg alloys, paving a new pathway for the development of advanced lightweight aluminum alloys.
Funding
- Science and Technology Department of Yunnan Province
Cite
APA
Yue, Y., Zhou, L., Ye, K., Chen, X., Li, M. V., & Fu, X. (2026). Microstructure Evolution, Crystallographic Orientation Regulation and Strength-Ductility Synergy Mechanism of Al-Si-Mg Alloy Synergistically Modified by Rare Earth Y and In Situ ZrB2 Nanoparticles. Metals, 16(6), 653. https://doi.org/10.3390/met16060653
Vancouver
Yue Y, Zhou L, Ye K, Chen X, Li MV, Fu X. Microstructure Evolution, Crystallographic Orientation Regulation and Strength-Ductility Synergy Mechanism of Al-Si-Mg Alloy Synergistically Modified by Rare Earth Y and In Situ ZrB2 Nanoparticles. Metals. 2026;16(6):653. doi:10.3390/met16060653
BibTeX
@article{Yue2026,
author = {Yue, Youcheng and Zhou, Lei and Ye, Kefeng and Chen, Xiumin and Li, Mengnie Victor and Fu, Xinglong},
title = {Microstructure Evolution, Crystallographic Orientation Regulation and Strength-Ductility Synergy Mechanism of Al-Si-Mg Alloy Synergistically Modified by Rare Earth Y and In Situ ZrB2 Nanoparticles},
journal = {Metals},
year = {2026},
volume = {16},
number = {6},
pages = {653},
doi = {10.3390/met16060653}
}
EUVIMED