EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Simplified CFD Framework for Parametric Analysis of the Cooling Stage During Aluminothermic Rail Welding: Rapid Welding Process with Short Preheating

Ravi Govindram Kewalramani, Ingo Riehl, Jan Hantusch, Tobias Fieback

Metals · 26.05.2026 · 16 (6) · 587

DOI: 10.3390/met16060587 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 26.05.2026. Verfasst von Ravi Govindram Kewalramani und 3 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry for Economic Affairs and Energy, TU Bergakademie Freiberg, German Research Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The quality and integrity of aluminothermic rail welds are strongly governed by the thermal conditions involved during preheating, pouring and cooling stages of the process. In this study, a simplified numerical framework is presented, based on the finite volume method and implemented in the open-source software OpenFOAM® version 7, to predict the heat transfer and solidification processes. Within this framework, the preheating stage is simulated by employing a heat flux profile derived from experimental measurements, while the mould filling stage is neglected under the assumption of instantaneous pouring of the molten metal. The steel–slag multiphase system is treated using the Volume of Fluid method, whereas melting and solidification are captured using the enthalpy-porosity approach on a fixed Eulerian grid. The numerical framework is validated for a rapid welding process with short preheating procedure, consistent with typical industrial practice for rail welding. The predicted temperature histories during the preheating stage show sufficiently good agreement with the experimental measurements. Subsequently, the cooling stage is validated for a molten metal temperature of 2200 °C (≈2473 K). The predicted width of the fusion zone is compared with experimental data, showing reasonably good agreement in the railhead region, while an underestimation is observed in the rail web and rail foot regions. Furthermore, a systematic parametric investigation is conducted by varying two key process parameters, namely the molten metal temperature examined at four distinct levels ranging from 1800 °C (≈2073 K) to 2400 °C (≈2673 K), and the active preheating duration, varied across six values ranging from 90 s (1.5 min)–390 s (6.5 min), in order to assess their influence on the cooling stage. The numerical results provide detailed insight into the temporal evolution of the thermal field and its influence on the formation and extent of the fusion zone and heat-affected zone. The results demonstrate that, despite simplifications, the model captures the dominant thermal phenomena of the process and offers a computationally efficient tool for parameter studies and process optimisation.

Förderung

  • Federal Ministry for Economic Affairs and Energy
  • TU Bergakademie Freiberg
  • German Research Foundation

Zitieren

APA

Kewalramani, R. G., Riehl, I., Hantusch, J., & Fieback, T. (2026). A Simplified CFD Framework for Parametric Analysis of the Cooling Stage During Aluminothermic Rail Welding: Rapid Welding Process with Short Preheating. Metals, 16(6), 587. https://doi.org/10.3390/met16060587

Vancouver

Kewalramani RG, Riehl I, Hantusch J, Fieback T. A Simplified CFD Framework for Parametric Analysis of the Cooling Stage During Aluminothermic Rail Welding: Rapid Welding Process with Short Preheating. Metals. 2026;16(6):587. doi:10.3390/met16060587

BibTeX
@article{Kewalramani2026,
  author = {Kewalramani, Ravi Govindram and Riehl, Ingo and Hantusch, Jan and Fieback, Tobias},
  title = {A Simplified CFD Framework for Parametric Analysis of the Cooling Stage During Aluminothermic Rail Welding: Rapid Welding Process with Short Preheating},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {587},
  doi = {10.3390/met16060587}
}
Kostenlos starten →