EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Defect Formation Mechanism and Mold Flux Optimization in Continuous Casting of Sulfur-Containing Medium-Carbon Microalloyed Steel Blooms

Liguang Zhu, Xin Wang, Yihua Han

Metals · 25.05.2026 · 16 (6) · 575

DOI: 10.3390/met16060575 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 25.05.2026. Verfasst von Liguang Zhu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Project of the National Natural Science Foundation of China—Joint Fund for Regional Innovation and Development, Hebei Province Innovation Capacity Enhancement Program, Hebei Provincial Science and Technology Programme of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sulfur-containing medium-carbon microalloyed steel blooms are widely used for high-load automotive components, and reducing surface defects is important for improving product yield and lowering downstream processing costs. To address surface defects such as star cracks and microcracks in the continuous casting of these steel blooms, this study redesigned the mold flux on the basis of the steel’s solidification characteristics and crack susceptibility and carried out a twin-strand industrial comparative casting trial. Thermodynamic and thermophysical analyses indicated that the relatively high contents of S, Mn, and Ti/N in the steel promoted the precipitation of MnS and TiN–MnS complex inclusions along grain boundaries, severely weakening grain boundary cohesion. Meanwhile, the high specific heat capacity and low thermal conductivity further intensified thermal stress concentration in the solidifying shell, rendering the steel highly susceptible to cracking. Evaluation of the originally used mold flux (Flux A) revealed that its high melting temperature (1189 °C), long melting time (106 s), high break temperature (1170 °C), and poor crystallization behavior resulted in an excessively thin liquid slag layer (

Förderung

  • Key Project of the National Natural Science Foundation of China—Joint Fund for Regional Innovation and Development
  • Hebei Province Innovation Capacity Enhancement Program
  • Hebei Provincial Science and Technology Programme of China
  • Key Project of the Natural Science Foundation of Hebei Province

Zitieren

APA

Zhu, L., Wang, X., & Han, Y. (2026). Surface Defect Formation Mechanism and Mold Flux Optimization in Continuous Casting of Sulfur-Containing Medium-Carbon Microalloyed Steel Blooms. Metals, 16(6), 575. https://doi.org/10.3390/met16060575

Vancouver

Zhu L, Wang X, Han Y. Surface Defect Formation Mechanism and Mold Flux Optimization in Continuous Casting of Sulfur-Containing Medium-Carbon Microalloyed Steel Blooms. Metals. 2026;16(6):575. doi:10.3390/met16060575

BibTeX
@article{Zhu2026,
  author = {Zhu, Liguang and Wang, Xin and Han, Yihua},
  title = {Surface Defect Formation Mechanism and Mold Flux Optimization in Continuous Casting of Sulfur-Containing Medium-Carbon Microalloyed Steel Blooms},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {575},
  doi = {10.3390/met16060575}
}
Kostenlos starten →