Novel Method for Predicting the Evolution of Mold Flux Properties during High‐Titanium Steel Continuous Casting
steel research international · 2026-11 · 97 (11) · 5382-5389
DOI: 10.1002/srin.202500606 ↗Kurz gefasst
Fachartikel in der Zeitschrift steel research international, online erschienen am 09.09.2025. Verfasst von Rongzhen Mo und 2 weiteren Autor:innen. Die Arbeit nennt 66 Literaturangaben. Gefördert von: National Nature Science Foundation of China.
Abstract (Originalsprache)
The current study combines the dynamic prediction model for mold flux composition in continuous casting with static prediction models for mold flux property to predict evolution of compositions and properties. The composition prediction model simplifies the continuous casting process into an “equilibrium–mass transfer–consumption–replenishment” cycle calculation within a time step, which accurately predicts the composition evolution during the continuous casting for high‐titanium steel. The mold flux viscosity is calculated using the structural model and the semiempirical model. Updated mold flux compositions at each time step are used to precisely predict liquidus temperature, the break temperature, crystallinity, and surface tension during the continuous casting. The effects of different mold flux types and initial Ti content in steel on mold flux property evolution are studied. Results demonstrate that CaO–Al 2 O 3 ‐based (CA) mold flux weakens the fluctuation of property compared to CaO–SiO 2 –Al 2 O 3 ‐based (CSA) and CaO–SiO 2 –based (CS) mold fluxes for high‐titanium steel continuous casting. The relative viscosity change of CA mold flux remains below 7.5%, while surface tension varies from 497.3 to 499.4 mN m −1 and then decreases to 496.7 mN m −1 . When the initial Ti content in steel exceeds 0.7 wt%, the Ti–Al 2 O 3 reaction gradually strengthens, which decreases the equilibrium Al 2 O 3 content in mold flux.
Förderung
- National Nature Science Foundation of China
Zitieren
APA
Mo, R., Ren, Y., & Zhang, L. (2026). Novel Method for Predicting the Evolution of Mold Flux Properties during High‐Titanium Steel Continuous Casting. steel research international, 97(11), 5382-5389. https://doi.org/10.1002/srin.202500606
Vancouver
Mo R, Ren Y, Zhang L. Novel Method for Predicting the Evolution of Mold Flux Properties during High‐Titanium Steel Continuous Casting. steel research international. 2026;97(11):5382-5389. doi:10.1002/srin.202500606
BibTeX
@article{Mo2026,
author = {Mo, Rongzhen and Ren, Ying and Zhang, Lifeng},
title = {Novel Method for Predicting the Evolution of Mold Flux Properties during High‐Titanium Steel Continuous Casting},
journal = {steel research international},
year = {2026},
volume = {97},
number = {11},
pages = {5382--5389},
doi = {10.1002/srin.202500606}
}
EUVIMED