EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural Evolution in the Stir Zone of a Friction-Stir-Processed Microalloyed Al-Mn-Cu Alloy

Franc Zupanič, Pamela Marcela Pineda Dominguez, Yan Lu, Torben Boll, Rafal Dunin-Borkowski, Lara Hočuršćak, Evelin Fisslthaler, Damjan Klobčar, Tonica Bončina

Metals · 23.03.2026 · 16 (3) · 358

DOI: 10.3390/met16030358 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 23.03.2026. Verfasst von Franc Zupanič und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovenian Research Agency, ESTEEM, ReMade@ARI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study investigates the microstructure evolution in the stir zone produced by the friction stir processing (FSP) of a heat-treated microalloyed Al-Mn-Cu alloy in the area subjected to the highest temperature, strain, and strain rate. The samples were studied using electron microscopy and atom probe tomography (APT) to obtain structural and chemical information from the macro to the nano scale. FSP refines the dendritic Al-rich solid solution grains through dynamic recrystallisation in the range of a few micrometres. The primary intermetallic phases were dispersed to the particles in the 0.5–3 µm range and transformed mainly into a more stable τ1-Al29Mn6Cu4 phase. The fraction of dispersed particles after FSP increased due to the precipitation from the solid solution during cooling. The nanoscale quasicrystalline precipitates in the matrix, formed upon heat treatment, dissolved entirely during FSP, while the strong coarsening of the L12 precipitates occurred due to high temperatures in the stir zone. After FSP, the hardness of the stir zone was nearly identical for specimens in the as-cast and heat-treated conditions.

Förderung

  • Slovenian Research Agency
  • ESTEEM
  • ReMade@ARI
  • NFFA-Europe
  • Elettra, Sincrotrone Trieste, Italy

Zitieren

APA

Zupanič, F., Dominguez, P. M. P., Lu, Y., Boll, T., Dunin-Borkowski, R., Hočuršćak, L., Fisslthaler, E., Klobčar, D., & Bončina, T. (2026). Microstructural Evolution in the Stir Zone of a Friction-Stir-Processed Microalloyed Al-Mn-Cu Alloy. Metals, 16(3), 358. https://doi.org/10.3390/met16030358

Vancouver

Zupanič F, Dominguez PMP, Lu Y, Boll T, Dunin-Borkowski R, Hočuršćak L, et al. Microstructural Evolution in the Stir Zone of a Friction-Stir-Processed Microalloyed Al-Mn-Cu Alloy. Metals. 2026;16(3):358. doi:10.3390/met16030358

BibTeX
@article{Zupani2026,
  author = {Zupanič, Franc and Dominguez, Pamela Marcela Pineda and Lu, Yan and Boll, Torben and Dunin-Borkowski, Rafal and Hočuršćak, Lara and Fisslthaler, Evelin and Klobčar, Damjan and Bončina, Tonica},
  title = {Microstructural Evolution in the Stir Zone of a Friction-Stir-Processed Microalloyed Al-Mn-Cu Alloy},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {358},
  doi = {10.3390/met16030358}
}
Kostenlos starten →