EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Distribution of Twin Boundaries on Three-Dimensional Grains of 316L Stainless Steel

Tingguang Liu, Guanglei Wang, Shuang Xia

Metals · 04.03.2026 · 16 (3) · 288

DOI: 10.3390/met16030288 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 04.03.2026. Verfasst von Tingguang Liu und 2 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The revelation of the distribution of twin boundaries on three-dimensional (3D) grains is of critical importance for the comprehension of their influence on material properties. However, this remains a significant challenge in the field of 3D material characterization. In this study, the distribution of twin boundaries on the surfaces of 3D grains in solution-annealed 316L stainless steel was systematically and quantitatively characterized using 3D electron backscatter diffraction. The results show that the average size of twin boundaries is significantly larger than that of random boundaries (approximately 52% larger). Although the size distributions of grains, random boundaries, and twin boundaries, as well as the distributions of the total number of grain boundaries and the number of twin boundaries per grain, all conform to a lognormal distribution, the area fraction of twin boundaries on grain surfaces exhibits a typical Lorentz distribution, while their number fraction shows no clear pattern. On average, each grain possesses 9.6 boundaries, of which 1.7 are twin boundaries, and the average area coverage of twin boundaries on grain surfaces reaches 38.4%. The findings offer a 3D statistical foundation for optimizing grain boundary engineering strategies in austenitic alloys.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liu, T., Wang, G., & Xia, S. (2026). Distribution of Twin Boundaries on Three-Dimensional Grains of 316L Stainless Steel. Metals, 16(3), 288. https://doi.org/10.3390/met16030288

Vancouver

Liu T, Wang G, Xia S. Distribution of Twin Boundaries on Three-Dimensional Grains of 316L Stainless Steel. Metals. 2026;16(3):288. doi:10.3390/met16030288

BibTeX
@article{Liu2026,
  author = {Liu, Tingguang and Wang, Guanglei and Xia, Shuang},
  title = {Distribution of Twin Boundaries on Three-Dimensional Grains of 316L Stainless Steel},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {288},
  doi = {10.3390/met16030288}
}
Kostenlos starten →