EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on a High-Quality Welding Method for Multi-Layer Aluminum Foil Current Collectors Based on Laser Power Control

Jingang Liu, Yun Chen, Liang Guo

Metals · 26.01.2026 · 16 (2) · 150

DOI: 10.3390/met16020150 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 26.01.2026. Verfasst von Jingang Liu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Province Key Field R&D Plan, National Excellent Engineers Innovation Institute of Guangdong-Hong Kong-Macao Greater Bay Area (Foshan) Advanced Manufacturing Industry, Key Field Research Projects in Foshan City.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reliable joining of multi-layer aluminum foil current collectors is crucial for enhancing the performance and safety of high-capacity lithium-ion batteries. However, laser welding of such thin-thick aluminum combinations is often hindered by porosity, cracks and unstable weld-pool behavior. In this study, a ring-mode fiber laser combined with sinusoidal oscillation and linearly gradient power modulation was employed to achieve high-quality lap welding between 80 layers of 1060 aluminum foil (1 mm in total thickness) and a 1.5 mm thick aluminum plate. Welding experiments and thermo-mechanical simulations were conducted to investigate the effects of welding speed (15–45 mm/s) and central-power modulation parameters (−2, 0, +2, +4) on weld morphology, defect formation, and mechanical properties. The results indicate that increasing the welding speed can effectively suppress cracks and improve the shear strength from 249.8 N to 403.9 N, but it also leads to an increase in porosity from 5.78% to 12.26% and deterioration of the weld reinforcement. Higher central-power modulation (+2, +4) transformed the weld-pool geometry from an ω shape to U shape, effectively suppressing fusion-line cracks but leading to increased porosity (up to 8.41%) and deteriorated surface morphology. Overall, a low welding speed of 15 mm/s combined with an optimized power modulation strategy achieves effective crack suppression while maintaining controlled porosity, resulting in a welded joint with superior comprehensive performance. This research provides a robust process solution for high-quality laser welding of multi-layer aluminum foil current collectors in power battery manufacturing.

Förderung

  • Guangdong Province Key Field R&D Plan
  • National Excellent Engineers Innovation Institute of Guangdong-Hong Kong-Macao Greater Bay Area (Foshan) Advanced Manufacturing Industry
  • Key Field Research Projects in Foshan City

Zitieren

APA

Liu, J., Chen, Y., & Guo, L. (2026). Research on a High-Quality Welding Method for Multi-Layer Aluminum Foil Current Collectors Based on Laser Power Control. Metals, 16(2), 150. https://doi.org/10.3390/met16020150

Vancouver

Liu J, Chen Y, Guo L. Research on a High-Quality Welding Method for Multi-Layer Aluminum Foil Current Collectors Based on Laser Power Control. Metals. 2026;16(2):150. doi:10.3390/met16020150

BibTeX
@article{Liu2026,
  author = {Liu, Jingang and Chen, Yun and Guo, Liang},
  title = {Research on a High-Quality Welding Method for Multi-Layer Aluminum Foil Current Collectors Based on Laser Power Control},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {150},
  doi = {10.3390/met16020150}
}
Kostenlos starten →