EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Component Evaporation and Uneven Aluminum Distribution during High-Power Vacuum Laser Welding of Ti-6Al-4V Titanium Alloy

Bingqi Wang, Shuaifeng Zhang, Xinyue Tan, Yifan Lv, Lvjie Liang, Zhiqian Liao, Anguo Huang

Metals · 28.06.2023 · 13 (7) · 1196

DOI: 10.3390/met13071196 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 28.06.2023. Verfasst von Bingqi Wang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Fund for Excellent Young Scholars (NSFC), National Natural Science Foundation of China (NSFC).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Titanium alloy is an important material for the manufacture of key components of deep-sea submersibles. High-power vacuum laser welding is an important method for welding TC4 thick plate (40–120 mm) structures. However, due to the low melting point of aluminum, its uneven distribution in the weld caused by evaporation during welding affects the quality of joints. This paper conducted experimental and simulation studies to investigate the effect of process parameters on multi-component evaporation and uneven aluminum distribution. Based on a three-dimensional model of vacuum laser welding, the mechanism of the uneven distribution of aluminum in the weld is explained. The results show that the uneven distribution of aluminum in the weld is mainly related to the metal vapor behavior and keyhole morphology. As the welding speed rises from 1 m/min to 3 m/min, the proportion of aluminum in the metal vapor and the degree of compositional unevenness increase. When the laser power increases from 6 kW to 18 kW, the proportion of aluminum in the metal vapor and degree of unevenness increase, peak at 12 kW, and then decrease. This work facilitates the selection of suitable process parameters to reduce aluminum evaporation during the high-power vacuum welding of Ti-6Al-4V alloys. Joints with a more stable performance can be obtained by avoiding the uneven distribution of aluminum.

Förderung

  • National Science Fund for Excellent Young Scholars (NSFC)
  • National Natural Science Foundation of China (NSFC)

Zitieren

APA

Wang, B., Zhang, S., Tan, X., Lv, Y., Liang, L., Liao, Z., & Huang, A. (2023). Multi-Component Evaporation and Uneven Aluminum Distribution during High-Power Vacuum Laser Welding of Ti-6Al-4V Titanium Alloy. Metals, 13(7), 1196. https://doi.org/10.3390/met13071196

Vancouver

Wang B, Zhang S, Tan X, Lv Y, Liang L, Liao Z, et al. Multi-Component Evaporation and Uneven Aluminum Distribution during High-Power Vacuum Laser Welding of Ti-6Al-4V Titanium Alloy. Metals. 2023;13(7):1196. doi:10.3390/met13071196

BibTeX
@article{Wang2023,
  author = {Wang, Bingqi and Zhang, Shuaifeng and Tan, Xinyue and Lv, Yifan and Liang, Lvjie and Liao, Zhiqian and Huang, Anguo},
  title = {Multi-Component Evaporation and Uneven Aluminum Distribution during High-Power Vacuum Laser Welding of Ti-6Al-4V Titanium Alloy},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {7},
  pages = {1196},
  doi = {10.3390/met13071196}
}
Kostenlos starten →