EERZ-Based Kinetic Modeling of Ladle Furnace Refining Pathways for Producing Weathering Steels Using CALPHAD TCOX Databases
Metals · 19.01.2026 · 16 (1) · 114
DOI: 10.3390/met16010114 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 19.01.2026. Verfasst von Reda Archa und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mohammed VI Polytechnic University (UM6P) and Maghreb Steel.
Abstract (Originalsprache)
The design of ladle furnace (LF) refining pathways for weathering steels requires precise control of multi-component steel/slag reactions governed simultaneously by thermodynamics and interfacial mass transfer kinetics. An EERZ-based kinetic modeling strategy was employed using the Thermo-Calc® (version 2022a) Process Metallurgy Module and the CALPHAD TCOX11 database to develop LF refining schedules capable of upgrading conventional S355J2R steel to weathering steel grades: S355J2W and S355J2WP. First, the sensitivity of predicted compositions to key kinetic inputs was quantified. The validated model was then used to simulate deoxidation and desulfurization sequences, predicting the evolution of liquid–steel and slag compositions, slag basicity, and FeO activity throughout the LF cycle. Subsequently, Cr- and P-ferroalloys were introduced to design tap-to-tap schedules that meet the EN 10025-5 chemical specifications for S355J2W and S355J2WP. To correlate simulation outcomes with material performance, plates produced following the modeled schedules were evaluated through a 1000 h accelerated salt spray test. Steel density and steel phase mass transfer coefficients were found to produce the highest prediction sensitivity (up to 7.5 wt.% variation in C and S), whereas slag phase parameters exhibited a lower impact. The predicted steel compositions showed strong agreement with industrial values obtained during plant trials. SEM-EDS analyses confirmed the development of a Cr-enriched protective patina and validated model-based alloying strategies.
Förderung
- Mohammed VI Polytechnic University (UM6P) and Maghreb Steel
Zitieren
APA
Archa, R., Sahir, Z., Benaouda, I., Lyass, A., Jibou, A., Azzaoui, H., Senhaji, S. B., Samih, Y., & Jacquemin, J. (2026). EERZ-Based Kinetic Modeling of Ladle Furnace Refining Pathways for Producing Weathering Steels Using CALPHAD TCOX Databases. Metals, 16(1), 114. https://doi.org/10.3390/met16010114
Vancouver
Archa R, Sahir Z, Benaouda I, Lyass A, Jibou A, Azzaoui H, et al. EERZ-Based Kinetic Modeling of Ladle Furnace Refining Pathways for Producing Weathering Steels Using CALPHAD TCOX Databases. Metals. 2026;16(1):114. doi:10.3390/met16010114
BibTeX
@article{Archa2026,
author = {Archa, Reda and Sahir, Zakaria and Benaouda, Ilham and Lyass, Amine and Jibou, Ahmed and Azzaoui, Hamza and Senhaji, Sanae Baki and Samih, Youssef and Jacquemin, Johan},
title = {EERZ-Based Kinetic Modeling of Ladle Furnace Refining Pathways for Producing Weathering Steels Using CALPHAD TCOX Databases},
journal = {Metals},
year = {2026},
volume = {16},
number = {1},
pages = {114},
doi = {10.3390/met16010114}
}
EUVIMED