Enhancing Hydrogen Embrittlement Resistance of Al–Zn–Mg–Cu Alloys via Si Microalloying and Optimized Heat Treatment
Metals · 09.01.2026 · 16 (1) · 76
DOI: 10.3390/met16010076 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 09.01.2026. Verfasst von Huijun Shi und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Advanced Materials-National Science and Technology Major Project, the National Natural Science Foundation of China.
Abstract (Originalsprache)
7xxx series aluminum alloys are critical structural materials in aerospace applications, but their susceptibility to hydrogen embrittlement (HE) poses significant challenges to service safety and durability. The effects of Si, Er, and Zr microalloying, combined with optimized heat treatments on the HE resistance of Al–Zn–Mg–Cu alloys, were systematically investigated using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and mechanical testing. Three alloys—1# (AlZnMgCuZr), 2# (AlZnMgCuErZr), and 3# (AlZnMgCuSiErZr)—were subjected to single-stage or two-stage homogenization, followed by solution treatments at 470 °C/2 h and 540 °C/1 h, and peak aging at 125 °C. The hydrogen charging experiment was conducted by first applying a modified acrylic resin coating to protect the gripping sections of the specimen, followed by a tensile test. Results demonstrate that alloy 3# with Si addition exhibited the lowest RAloss, followed by the 2# alloy, which effectively improved the alloys’ hydrogen embrittlement behavior. Compared with the solution in 470 °C/2 h, the 540 °C/1 h solution treatment enabled complete dissolution of Mg2Si phases, promoting homogeneous precipitation and peak hardness comparable to alloy 2#. Two-stage homogenization significantly enhanced the number density and refinement of L12-structured Al3(Er,Zr) nanoprecipitates. Silicon further accelerated the precipitation kinetics, leading to more Al3(Er,Zr) nanoprecipitates, finely dispersed T′/η′ phases, and lath-shaped GPB-II zones. The GPB-II zones effectively trapped hydrogen, thereby improving HE resistance. This work provides a viable strategy for enhancing the reliability of high-strength aluminum alloys in hydrogen-containing environments.
Förderung
- the Advanced Materials-National Science and Technology Major Project
- the National Natural Science Foundation of China
Zitieren
APA
Shi, H., Hu, R., Lu, Y., Wen, S., Wei, W., Wu, X., Gao, K., Huang, H., & Nie, Z. (2026). Enhancing Hydrogen Embrittlement Resistance of Al–Zn–Mg–Cu Alloys via Si Microalloying and Optimized Heat Treatment. Metals, 16(1), 76. https://doi.org/10.3390/met16010076
Vancouver
Shi H, Hu R, Lu Y, Wen S, Wei W, Wu X, et al. Enhancing Hydrogen Embrittlement Resistance of Al–Zn–Mg–Cu Alloys via Si Microalloying and Optimized Heat Treatment. Metals. 2026;16(1):76. doi:10.3390/met16010076
BibTeX
@article{Shi2026,
author = {Shi, Huijun and Hu, Ruian and Lu, Yi and Wen, Shengping and Wei, Wu and Wu, Xiaolan and Gao, Kunyuan and Huang, Hui and Nie, Zuoren},
title = {Enhancing Hydrogen Embrittlement Resistance of Al–Zn–Mg–Cu Alloys via Si Microalloying and Optimized Heat Treatment},
journal = {Metals},
year = {2026},
volume = {16},
number = {1},
pages = {76},
doi = {10.3390/met16010076}
}
EUVIMED