EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a Laser Cladding Technology for Repairing First-Stage High-Pressure Turbine Blades in Gas Turbine Engines

Stepan Tukov, Rudolf Korsmik, Grigoriy Zadykyan, Dmitrii Mukin, Ruslan Mendagaliev, Nikita Roschin

Metals · 28.08.2025 · 15 (9) · 957

DOI: 10.3390/met15090957 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 28.08.2025. Verfasst von Stepan Tukov und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation under the “World-Class Science Center” program: Advanced digital technologies, Russian Science Foundation under the project “Heat-Resistant Nickel Alloys for Additive Technologies: Design and Research of Structure and Properties”.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A gas turbine engine is a technological system consisting of a compressor, a combustion chamber, and other modules. All these components are subjected to dynamic and cyclic loads, which lead to fatigue cracks and mechanical damage. The aim of this work is to repair the worn surfaces of a series of DR-59L high-pressure turbine blades by laser powder cladding. A number of technological parameters of laser cladding were tested to obtain a defect-free structure on the witness sample. The metal powder of the cobalt alloy Stellite 21 was used as a filler material. By modeling the process of restoring rotor blades, the operating mode of laser powder cladding was determined. No defects were detected during capillary control of the restored surfaces of the rotor blades. The results of the uniaxial tension test of the restored rotor blades showed increased tensile strength and elongation. With the use of laser powder cladding technology, it was possible to restore the worn surfaces of a series of rotor blades of the DR-59L high-pressure turbine, thereby increasing the life cycle of power plant products.

Förderung

  • Ministry of Science and Higher Education of the Russian Federation under the “World-Class Science Center” program: Advanced digital technologies
  • Russian Science Foundation under the project “Heat-Resistant Nickel Alloys for Additive Technologies: Design and Research of Structure and Properties”

Zitieren

APA

Tukov, S., Korsmik, R., Zadykyan, G., Mukin, D., Mendagaliev, R., & Roschin, N. (2025). Development of a Laser Cladding Technology for Repairing First-Stage High-Pressure Turbine Blades in Gas Turbine Engines. Metals, 15(9), 957. https://doi.org/10.3390/met15090957

Vancouver

Tukov S, Korsmik R, Zadykyan G, Mukin D, Mendagaliev R, Roschin N. Development of a Laser Cladding Technology for Repairing First-Stage High-Pressure Turbine Blades in Gas Turbine Engines. Metals. 2025;15(9):957. doi:10.3390/met15090957

BibTeX
@article{Tukov2025,
  author = {Tukov, Stepan and Korsmik, Rudolf and Zadykyan, Grigoriy and Mukin, Dmitrii and Mendagaliev, Ruslan and Roschin, Nikita},
  title = {Development of a Laser Cladding Technology for Repairing First-Stage High-Pressure Turbine Blades in Gas Turbine Engines},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {9},
  pages = {957},
  doi = {10.3390/met15090957}
}
Kostenlos starten →