EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Laser Cleaning Combined with Cladding Improves Cladding Quality for Repairing Steel Plates in Pressure Vessels

Kaijun Fan, Yongjun Shi, Youfan Xu, Shuyao Wang, Qin Wang, Ying Li, Cheng Zhang, Zhaojian Li

Coatings · 19.04.2024 · 14 (4) · 508

DOI: 10.3390/coatings14040508 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 19.04.2024. Verfasst von Kaijun Fan und 7 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Province Natural Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Good-quality metallurgical bonding and a high degree of automation are critical for using laser cladding technology in on-site repairs. At present, most of the on-site repairs are carried out manually, which can bring about problems such as complicated operation procedures, uneven repair quality, and personnel injuries. In this study, a surface repair method that combined laser cleaning with cladding (LCC) was proposed. First, the plates were scanned with a high-frequency pulsed laser to remove the surface impurity layer. The surface was then coated with Inconel 625 powder while irradiated with a continuous laser for the cladding. Both the macro-morphology and microstructure of the surface were examined, and mechanical property tests were also conducted. The metallographic and scanning electron microscope images indicated that, compared to the manual polishing and laser cladding process, the LCC specimens had a better metallurgical bonding quality and a thicker clad layer. The average hardness of the clad layer on the LCC specimens was high at 256.47 HV, 36.2% higher than that of the Q345R substrate. Compared to the Q345R specimens of the same size, the LCC specimens showed an increased impact on the energy absorption, yield strength, and tensile strength. This study provides a new approach for improving the automation and cladding quality of on-site repairs.

Förderung

  • Shandong Province Natural Science Foundation

Zitieren

APA

Fan, K., Shi, Y., Xu, Y., Wang, S., Wang, Q., Li, Y., Zhang, C., & Li, Z. (2024). Laser Cleaning Combined with Cladding Improves Cladding Quality for Repairing Steel Plates in Pressure Vessels. Coatings, 14(4), 508. https://doi.org/10.3390/coatings14040508

Vancouver

Fan K, Shi Y, Xu Y, Wang S, Wang Q, Li Y, et al. Laser Cleaning Combined with Cladding Improves Cladding Quality for Repairing Steel Plates in Pressure Vessels. Coatings. 2024;14(4):508. doi:10.3390/coatings14040508

BibTeX
@article{Fan2024,
  author = {Fan, Kaijun and Shi, Yongjun and Xu, Youfan and Wang, Shuyao and Wang, Qin and Li, Ying and Zhang, Cheng and Li, Zhaojian},
  title = {Laser Cleaning Combined with Cladding Improves Cladding Quality for Repairing Steel Plates in Pressure Vessels},
  journal = {Coatings},
  year = {2024},
  volume = {14},
  number = {4},
  pages = {508},
  doi = {10.3390/coatings14040508}
}
Kostenlos starten →