Topology Optimization of a Milling Cutter Head for Additive Manufacturing
Metals · 29.06.2025 · 15 (7) · 729
DOI: 10.3390/met15070729 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 29.06.2025. Verfasst von Ilídio Brito Costa und 6 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: PALBIT.
Abstract (Originalsprache)
The rapid growth of the machining market and advancements in additive manufacturing (AM) present new opportunities for innovative tool designs. This preliminary study proposes a design for additive manufacturing (DfAM) approach to redesign a milling cutter head in 17-4 PH stainless steel by integrating topology optimization (TO) and internal coolant channel optimization, enabled by laser powder bed fusion (LPBF). An industrial eight-insert milling cutting tool was reimagined with conformal cooling channels and a lightweight topology-optimized structure. The design process considered LPBF constraints and was iteratively refined using computational fluid dynamics (CFD) and finite element analysis (FEA) to validate fluid flow and structural performance. The optimized milling head achieved approximately 10% weight reduction while improving stiffness (reducing maximum deformation under load from 160 μm to 151 μm) and providing enhanced coolant distribution to the cutting inserts. The results demonstrate that combining TO with internal channel design can yield a high-performance and lightweight milling tool that leverages the freedom of additive manufacturing. As proof of concept, this integrated CFD–FEA validation approach under DfAM guidelines highlights a promising pathway toward superior cutting tool designs for industrial applications.
Förderung
- PALBIT
Zitieren
APA
Costa, I. B., Cunha, B. R., Marouvo, J., Figueiredo, D., Guimarães, B. M., Vieira, M. F., & Costa, J. M. (2025). Topology Optimization of a Milling Cutter Head for Additive Manufacturing. Metals, 15(7), 729. https://doi.org/10.3390/met15070729
Vancouver
Costa IB, Cunha BR, Marouvo J, Figueiredo D, Guimarães BM, Vieira MF, et al. Topology Optimization of a Milling Cutter Head for Additive Manufacturing. Metals. 2025;15(7):729. doi:10.3390/met15070729
BibTeX
@article{Costa2025,
author = {Costa, Ilídio Brito and Cunha, Bruno Rafael and Marouvo, João and Figueiredo, Daniel and Guimarães, Bruno Miguel and Vieira, Manuel Fernando and Costa, José Manuel},
title = {Topology Optimization of a Milling Cutter Head for Additive Manufacturing},
journal = {Metals},
year = {2025},
volume = {15},
number = {7},
pages = {729},
doi = {10.3390/met15070729}
}
EUVIMED