Numerical Analysis of the Laser Forming Process of Cylindrical Surfaces
Metals · 03.04.2025 · 15 (4) · 402
DOI: 10.3390/met15040402 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 03.04.2025. Verfasst von Daniel Cabezas und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chilean Agency of Research and Development (ANID).
Abstract (Originalsprache)
This research reports on numerical simulations of the multi-pass laser forming process aimed at obtaining cylindrical surfaces from planar AISI 304 stainless-steel sheets. The effect of laser power, scanning speed, and distance between irradiation lines on the thermomechanical material response is assessed, with particular emphasis on the final curvature radius, maximum temperature, and final plastic deformation. To this end, a coupled thermomechanical finite element formulation is applied to the analysis of different experimental tests reported in the literature. The predictive capabilities of this model are demonstrated in the analysis of bent parts exhibiting a wide range of curvature radii, whose values were found in this work to inversely correlate with the total line energy input to the workpiece. In such situations, it was found that both the thermal response and the effective plastic strain values obtained in each test correlate directly with the line energy value. Furthermore, the distance between irradiation lines was identified as a key parameter in the formation of cylindrical surfaces, as it significantly influences the displacement and induced deformation. However, no significant impact of this parameter on the effective plastic strain was observed.
Förderung
- Chilean Agency of Research and Development (ANID)
Zitieren
APA
Cabezas, D., Celentano, D. J., Cruchaga, M. A., García-Herrera, C., & Monsalve, A. (2025). Numerical Analysis of the Laser Forming Process of Cylindrical Surfaces. Metals, 15(4), 402. https://doi.org/10.3390/met15040402
Vancouver
Cabezas D, Celentano DJ, Cruchaga MA, García-Herrera C, Monsalve A. Numerical Analysis of the Laser Forming Process of Cylindrical Surfaces. Metals. 2025;15(4):402. doi:10.3390/met15040402
BibTeX
@article{Cabezas2025,
author = {Cabezas, Daniel and Celentano, Diego J. and Cruchaga, Marcela A. and García-Herrera, Claudio and Monsalve, Alberto},
title = {Numerical Analysis of the Laser Forming Process of Cylindrical Surfaces},
journal = {Metals},
year = {2025},
volume = {15},
number = {4},
pages = {402},
doi = {10.3390/met15040402}
}
EUVIMED