EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Review on Material Dynamics in Cold Spray Additive Manufacturing: Bonding, Stress, and Structural Evolution in Metals

Abishek Kafle, Shengjun Lu, Raman Silwal, Weihang Zhu

Metals · 12.02.2025 · 15 (2) · 187

DOI: 10.3390/met15020187 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 12.02.2025. Verfasst von Abishek Kafle und 3 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: United States Department of Agriculture, National Science Foundation, US. Environmental Protection Agency.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CSAM is a solid-state process for depositing metal or metal-based composite materials in which the fine particles of metal or composite material are accelerated to supersonic velocity, making successful bonding feasible due to the high-impact velocity and heavy plastic deformation, all without the melting of the feedstock material. This review examines the basic CSAM mechanism, including deposition dynamics, bonding mechanism, dynamic recrystallization, residual stress evolution, and post-spray heat treatments which affect microstructural and mechanical properties. Although controlled by a few key factors like particle velocity, strain rate, and temperature rise, the bonding efficiency itself refines the grains through dynamic recrystallization, hence improving coating strength and performance. The predominating compressive residual stresses that enhance fatigue resistance and mitigation strategies to improve coating durability by post-spray annealing and laser peening are discussed. This review, by providing an overview of material behavior, optimization techniques, and advanced modeling approaches, underlines the CSAM potential for high-performance applications in aerospace, biomedical industries, and machinery. It further underlines its importance for the advancement of manufacturing innovation and materials science.

Förderung

  • United States Department of Agriculture
  • National Science Foundation
  • US. Environmental Protection Agency
  • US. Department of Education
  • George Foundation Grant to University of Houston at Sugar Land
  • Metals journal

Zitieren

APA

Kafle, A., Lu, S., Silwal, R., & Zhu, W. (2025). A Review on Material Dynamics in Cold Spray Additive Manufacturing: Bonding, Stress, and Structural Evolution in Metals. Metals, 15(2), 187. https://doi.org/10.3390/met15020187

Vancouver

Kafle A, Lu S, Silwal R, Zhu W. A Review on Material Dynamics in Cold Spray Additive Manufacturing: Bonding, Stress, and Structural Evolution in Metals. Metals. 2025;15(2):187. doi:10.3390/met15020187

BibTeX
@article{Kafle2025,
  author = {Kafle, Abishek and Lu, Shengjun and Silwal, Raman and Zhu, Weihang},
  title = {A Review on Material Dynamics in Cold Spray Additive Manufacturing: Bonding, Stress, and Structural Evolution in Metals},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {2},
  pages = {187},
  doi = {10.3390/met15020187}
}
Kostenlos starten →