EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterization of Microstructure and Localized Corrosion Resistance of Heat-Treated 17-4 PH Stainless Steel Fabricated by Material Extrusion

Pietro Forcellese, Tommaso Mancia, Michela Simoncini, Tiziano Bellezze

Metals · 29.01.2025 · 15 (2) · 137

DOI: 10.3390/met15020137 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 29.01.2025. Verfasst von Pietro Forcellese und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The quality, reproducibility, and reliability of additive-manufactured parts strongly depend on optimizing printing parameters and post-processing treatments. This study evaluates the effects on the microstructure and corrosion resistance properties of solution annealing and aging heat treatments performed on 17-4 PH stainless steel samples fabricated with different build-up orientations using a material extrusion technology: the Bound Metal DepositionTM. The chemical composition and microstructures were determined using X-ray diffraction, chemical etching, optical microscopy, and scanning electron microscopy. The corrosion resistance properties in neutral sodium chloride electrolytes were investigated through cyclic potentiodynamic polarization and open circuit potential monitoring and analysis. The findings demonstrated that the solution annealing heat treatment remarkably enhanced the overall corrosion resistance properties of the samples. The improvement was attributed to the growth of the ferritic phase along the grain boundaries of the martensitic matrix and a finer dispersion of copper precipitates. The aging heat treatment performed after solution annealing enhanced the ferritic phase development, resulting in a further improvement of the localized corrosion resistance properties.

Zitieren

APA

Forcellese, P., Mancia, T., Simoncini, M., & Bellezze, T. (2025). Characterization of Microstructure and Localized Corrosion Resistance of Heat-Treated 17-4 PH Stainless Steel Fabricated by Material Extrusion. Metals, 15(2), 137. https://doi.org/10.3390/met15020137

Vancouver

Forcellese P, Mancia T, Simoncini M, Bellezze T. Characterization of Microstructure and Localized Corrosion Resistance of Heat-Treated 17-4 PH Stainless Steel Fabricated by Material Extrusion. Metals. 2025;15(2):137. doi:10.3390/met15020137

BibTeX
@article{Forcellese2025,
  author = {Forcellese, Pietro and Mancia, Tommaso and Simoncini, Michela and Bellezze, Tiziano},
  title = {Characterization of Microstructure and Localized Corrosion Resistance of Heat-Treated 17-4 PH Stainless Steel Fabricated by Material Extrusion},
  journal = {Metals},
  year = {2025},
  volume = {15},
  number = {2},
  pages = {137},
  doi = {10.3390/met15020137}
}
Kostenlos starten →